For other alternatives, please contact us for more information.

0 Alternative products available

RRZZ-65A-R4N39

8-port sector antenna, 4x 694–960 and 4x 1427–2690, 65° HPBW, 4x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

All Internal RET actuators are connected in “Cascaded SRET” configuration
Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
Array configuration provides capability for 4T4R (4x MIMO) on Low band and High band
Excellent wind loading characteristics

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, mid band	4
RF Connector Quantity, low band	4
RF Connector Quantity, total	8

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	High band (2) \| Low band (2)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0

Dimensions

Width	395 mm \| 15.551 in
Depth	228 mm \| 8.976 in
Length	1499 mm \| 59.016 in
Net Weight, antenna only	23.5 kg \| 51.809 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz \| 1427 – 2690 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

	R1,R2	R1,R2	R1,R2	Y1,Y2	Y1,Y2	Y1,Y2	Y1,Y2	Y1,Y2
Frequency Band, MHz	698–806	790–896	890–960	1427–1518	1695–1990	1920–2300	2300–2500	2490–2690
RF Port	1,2,3,4	1,2,3,4	1,2,3,4	5,6,7,8	5,6,7,8	5,6,7,8	5,6,7,8	5,6,7,8
Gain at Mid Tilt, dBi	12.3	13.0	13.3	15.3	16.7	17.5	18.3	18.3
Beamwidth, Horizontal, degrees	60	54	49	70	62	67	63	53
Beamwidth, Vertical, degrees	17.3	15.6	14.5	7.7	6.3	5.7	5	4.7
Beam Tilt, degrees	3–16	3–16	3–16	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	15	15	15	16	14	14	17	16
Front-to-Back Ratio at 180°, dB	28	26	25	30	33	31	30	30
Front-to-Back Total Power at 180° ± 30°, dB	18	19	19	23	25	26	24	25
Isolation, Cross Polarization, dB	25	25	25	26	26	26	26	26
Isolation, Inter-band, dB	25	25	25	27	27	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	300	250	250	250	200

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	790–896	890–960	1427–1518	1695–1990	1920–2300	2300–2500	2490–2690
Gain by all Beam Tilts, average, dBi	12.3	13.0	13.3	15.3	16.6	17.3	18.1	18.2
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.5	±0.4	±0.4	±1	±0.6	±0.6	±0.4
Beamwidth, Horizontal Tolerance, degrees	±7	±4	±5	±8	±10	±11	±12	±4
Beamwidth, Vertical Tolerance, degrees	±1.6	±1.4	±1.1	±0.4	±0.5	±0.6	±0.3	±0.3
USLS, beampeak to 20° above beampeak, dB	18	16	15	12	13	13	14	15
CPR at Boresight, dB	21	18	18	17	17	13	11	12
CPR at Sector, dB	5	5	5	8	4	4	6	1

Mechanical Specifications

Wind Loading @ Velocity, frontal	225.0 N @ 150 km/h (50.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	242.0 N @ 150 km/h (54.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	496.0 N @ 150 km/h (111.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	256.0 N @ 150 km/h (57.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	505 mm \| 19.882 in
Depth, packed	386 mm \| 15.197 in
Length, packed	1643 mm \| 64.685 in
Weight, gross	35.7 kg \| 78.705 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, mid band	4
RF Connector Quantity, low band	4
RF Connector Quantity, total	8

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	High band (2) \| Low band (2)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0

Dimensions

Width	395 mm \| 15.551 in
Depth	228 mm \| 8.976 in
Length	1499 mm \| 59.016 in
Net Weight, antenna only	23.5 kg \| 51.809 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz \| 1427 – 2690 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

	R1,R2	R1,R2	R1,R2	Y1,Y2	Y1,Y2	Y1,Y2	Y1,Y2	Y1,Y2
Frequency Band, MHz	698–806	790–896	890–960	1427–1518	1695–1990	1920–2300	2300–2500	2490–2690
RF Port	1,2,3,4	1,2,3,4	1,2,3,4	5,6,7,8	5,6,7,8	5,6,7,8	5,6,7,8	5,6,7,8
Gain at Mid Tilt, dBi	12.3	13.0	13.3	15.3	16.7	17.5	18.3	18.3
Beamwidth, Horizontal, degrees	60	54	49	70	62	67	63	53
Beamwidth, Vertical, degrees	17.3	15.6	14.5	7.7	6.3	5.7	5	4.7
Beam Tilt, degrees	3–16	3–16	3–16	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	15	15	15	16	14	14	17	16
Front-to-Back Ratio at 180°, dB	28	26	25	30	33	31	30	30
Front-to-Back Total Power at 180° ± 30°, dB	18	19	19	23	25	26	24	25
Isolation, Cross Polarization, dB	25	25	25	26	26	26	26	26
Isolation, Inter-band, dB	25	25	25	27	27	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	300	250	250	250	200

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	790–896	890–960	1427–1518	1695–1990	1920–2300	2300–2500	2490–2690
Gain by all Beam Tilts, average, dBi	12.3	13.0	13.3	15.3	16.6	17.3	18.1	18.2
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.5	±0.4	±0.4	±1	±0.6	±0.6	±0.4
Beamwidth, Horizontal Tolerance, degrees	±7	±4	±5	±8	±10	±11	±12	±4
Beamwidth, Vertical Tolerance, degrees	±1.6	±1.4	±1.1	±0.4	±0.5	±0.6	±0.3	±0.3
USLS, beampeak to 20° above beampeak, dB	18	16	15	12	13	13	14	15
CPR at Boresight, dB	21	18	18	17	17	13	11	12
CPR at Sector, dB	5	5	5	8	4	4	6	1

Mechanical Specifications

Wind Loading @ Velocity, frontal	225.0 N @ 150 km/h (50.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	242.0 N @ 150 km/h (54.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	496.0 N @ 150 km/h (111.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	256.0 N @ 150 km/h (57.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	505 mm \| 19.882 in
Depth, packed	386 mm \| 15.197 in
Length, packed	1643 mm \| 64.685 in
Weight, gross	35.7 kg \| 78.705 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted