For other alternatives, please contact us for more information.

0 Alternative products available

EGR-65D-R3N43

6-port sector antenna, 2x 694-862, 2x 880-960, 2x 694-960, 65° HPBW, 3 x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Retractable tilt indicator rods
All Internal RET actuators are connected in “Cascaded SRET” configuration
Antenna shape optimized for wind load reduction

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	6
RF Connector Quantity, total	6

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	Low band (3)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	430 mm \| 16.929 in
Depth	197 mm \| 7.756 in
Length	2769 mm \| 109.016 in
Net Weight, without mounting kit	45.5 kg \| 100.310 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 862 MHz \| 694 – 960 MHz \| 880 – 960 MHz
Polarization	±45°
Total Input Power, maximum	700 W @ 50 °C

Electrical Specifications

	R1	R2	R3
Frequency Band, MHz	694–862	880–960	694–960
Gain, dBi	15.8	16.3	16.7
Beamwidth, Horizontal, degrees	59	53	57
Beamwidth, Vertical, degrees	7.3	6.2	6.9
Beam Tilt, degrees	2–12	2–12	2–12
USLS (First Lobe), dB	16	16	14
Front-to-Back Ratio at 180°, dB	29	25	27
Isolation, Cross Polarization, dB	27	27	27
Isolation, Inter-band, dB	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	250	250	250

Electrical Specifications, BASTA

Frequency Band, MHz	694–862	880–960	694–960
Gain by all Beam Tilts, average, dBi	15.4	16.0	16.0
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.6	±0.8
Gain by Beam Tilt, average, dBi	2 ° \| 15.4 6 ° \| 15.4 12 ° \| 15.3	2 ° \| 15.9 6 ° \| 16.1 12 ° \| 15.9	2 ° \| 16.0 6 ° \| 16.1 12 ° \| 16.0
Beamwidth, Horizontal Tolerance, degrees	±8.7	±3.8	±7.6
Beamwidth, Vertical Tolerance, degrees	±0.8	±0.4	±1
USLS, beampeak to 20° above beampeak, dB	13	13	12
Front-to-Back Total Power at 180° ± 30°, dB	23	22	23
CPR at Boresight, dB	24	24	23
CPR at Sector, dB	11	8	11

Mechanical Specifications

Wind Loading @ Velocity, frontal	680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,020.0 N @ 150 km/h (229.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	530 mm \| 20.866 in
Depth, packed	356 mm \| 14.016 in
Length, packed	2897 mm \| 114.055 in
Weight, gross	65.7 kg \| 144.844 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant, Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	6
RF Connector Quantity, total	6

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	Low band (3)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	430 mm \| 16.929 in
Depth	197 mm \| 7.756 in
Length	2769 mm \| 109.016 in
Net Weight, without mounting kit	45.5 kg \| 100.310 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 862 MHz \| 694 – 960 MHz \| 880 – 960 MHz
Polarization	±45°
Total Input Power, maximum	700 W @ 50 °C

Electrical Specifications

	R1	R2	R3
Frequency Band, MHz	694–862	880–960	694–960
Gain, dBi	15.8	16.3	16.7
Beamwidth, Horizontal, degrees	59	53	57
Beamwidth, Vertical, degrees	7.3	6.2	6.9
Beam Tilt, degrees	2–12	2–12	2–12
USLS (First Lobe), dB	16	16	14
Front-to-Back Ratio at 180°, dB	29	25	27
Isolation, Cross Polarization, dB	27	27	27
Isolation, Inter-band, dB	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	250	250	250

Electrical Specifications, BASTA

Frequency Band, MHz	694–862	880–960	694–960
Gain by all Beam Tilts, average, dBi	15.4	16.0	16.0
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.6	±0.8
Gain by Beam Tilt, average, dBi	2 ° \| 15.4; 6 ° \| 15.4;12 ° \| 15.3	2 ° \| 15.9; 6 ° \| 16.1;12 ° \| 15.9	2 ° \| 16.0; 6 ° \| 16.1;12 ° \| 16.0
Beamwidth, Horizontal Tolerance, degrees	±8.7	±3.8	±7.6
Beamwidth, Vertical Tolerance, degrees	±0.8	±0.4	±1
USLS, beampeak to 20° above beampeak, dB	13	13	12
Front-to-Back Total Power at 180° ± 30°, dB	23	22	23
CPR at Boresight, dB	24	24	23
CPR at Sector, dB	11	8	11

Mechanical Specifications

Wind Loading @ Velocity, frontal	680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,020.0 N @ 150 km/h (229.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	530 mm \| 20.866 in
Depth, packed	356 mm \| 14.016 in
Length, packed	2897 mm \| 114.055 in
Weight, gross	65.7 kg \| 144.844 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant, Compliant/Exempted