For other alternatives, please contact us for more information.

0 Alternative products available

E16Z01P82

Quad Band TMA 1800/2100/2300/2600 with 694-960 bypass, 1 AISG, 4 devices - 2 subunits, 4.3-10 connectors

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Industry leading PIM performance
Designed to boost UP-Link Coverage and KPIs
TMA is operating in AISG mode
4 devices with 2 sub-units
Option to by-pass TDD2300 LNA
Single AISG with 1 RET connector
RET interface to control antenna RET actuators with AISG standard
Automatic LNA by-pass function
2 input ports and 4 output ports
TMA with 694-960 MHz bypass
New 4.3-10 connectors for improved PIM performance and size reduction

Specifications

Product Classification

Product Type

1-BTS:2-ANT (Diplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	120 mm \| 4.724 in
Width	457 mm \| 17.992 in
Depth	275 mm \| 10.827 in
Mounting Pipe Diameter Range	42.6–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA

DCS 1800 | IMT 2100 | IMT 2600 | TDD 2300

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	5 kA
Lightning Surge Current Waveform	8/20 waveform

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2	1 \| 2	1 \| 2
Branch	1	2	3	4
Port Designation	ANT	ANT	ANT	ANT
License Band	DCS 1800, LNA	IMT 2100, LNA	TDD 2300, LNA	IMT 2600, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980	2300–2400	2500–2570
Bandwidth, MHz	75.00	60.00	100.00	70.00
Gain, nominal, dB	12.0	12.0	12.0	12.0
Noise Figure, typical, dB	1.2	1.2	2.2	1.2
Total Group Delay, typical, ns	100	80	65	70
Return Loss, typical, dB	20	20	20	20
Insertion Loss - Bypass Mode, typical, dB	2.0	2.0	2.0	2.0
Return Loss - Bypass Mode, typical, dB	18	18	18	18

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170	2300–2400	2620–2690
Bandwidth, MHz	75.00	60.00	100.00	70.00
Insertion Loss, typical, dB	0.50	0.30	1.70	0.40
Total Group Delay, typical, ns	40	22	58	22
Return Loss, typical, dB	20	20	18	20
Input Power, RMS, maximum, W	100	100	50	100
Input Power, PEP, maximum, W	1,000	1,000	500	1,000
3rd Order PIM, typical, dBc	-155	-155		-155
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers		Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	15 L
Weight, net	18.5 kg \| 40.785 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type

1-BTS:2-ANT (Diplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	120 mm \| 4.724 in
Width	457 mm \| 17.992 in
Depth	275 mm \| 10.827 in
Mounting Pipe Diameter Range	42.6–122 mm

Electrical Specifications

License Band, LNA

DCS 1800 | IMT 2100 | IMT 2600 | TDD 2300

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	5 kA
Lightning Surge Current Waveform	8/20 waveform

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2	1 \| 2	1 \| 2
Branch	1	2	3	4
Port Designation	ANT	ANT	ANT	ANT
License Band	DCS 1800, LNA	IMT 2100, LNA	TDD 2300, LNA	IMT 2600, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980	2300–2400	2500–2570
Bandwidth, MHz	75.00	60.00	100.00	70.00
Gain, nominal, dB	12.0	12.0	12.0	12.0
Noise Figure, typical, dB	1.2	1.2	2.2	1.2
Total Group Delay, typical, ns	100	80	65	70
Return Loss, typical, dB	20	20	20	20
Insertion Loss - Bypass Mode, typical, dB	2.0	2.0	2.0	2.0
Return Loss - Bypass Mode, typical, dB	18	18	18	18

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170	2300–2400	2620–2690
Bandwidth, MHz	75.00	60.00	100.00	70.00
Insertion Loss, typical, dB	0.50	0.30	1.70	0.40
Total Group Delay, typical, ns	40	22	58	22
Return Loss, typical, dB	20	20	18	20
Input Power, RMS, maximum, W	100	100	50	100
Input Power, PEP, maximum, W	1,000	1,000	500	1,000
3rd Order PIM, typical, dBc	-155	-155		-155
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers		Two +43 dBm carriers

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67