For other alternatives, please contact us for more information.

0 Alternative products available

E14R00P02

Tower Mounted Amplifier, Dual DCS 1800 with AISG 2.0, with 4.3-10 connectors

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Industry leading PIM performance
New 4.3-10 connectors for improved PIM performance and size reduction
TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
Designed to boost UP-Link Coverage and KPIs
RET interface to control antenna RET actuators with AISG standard
Single AISG with 1 RET connector
Automatic LNA by-pass function
Built in lightning protection
1 device with 2 sub-units
Connectors “in line”
2 input ports and 2 output ports

Specifications

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	225 mm \| 8.858 in
Width	227 mm \| 8.937 in
Depth	56 mm \| 2.205 in
Ground Screw Diameter	8 mm \| 0.315 in
Mounting Pipe Diameter Range	40–160 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA	DCS 1800
Voltage	9 Vdc

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Operating Current at Voltage	110 mA @ 12 V
Operating Current Tolerance	±20 mA
Voltage	7–30 Vdc
Voltage, CWA Mode	10–18 Vdc
Alarm Current, CWA Mode	195 mA ±15 mA

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2
Branch	1
Port Designation	ANT
License Band	DCS 1800, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785
Bandwidth, MHz	75.00
Gain, nominal, dB	12.0
Gain Tolerance, dB	±1
Noise Figure, maximum, dB	1.8
Noise Figure, typical, dB	1.4
Group Delay Variation, maximum, ns	50
Group Delay Variation Bandwidth, MHz	5.00
Total Group Delay, maximum, ns	150
Return Loss, minimum, dB	18
Insertion Loss - Bypass Mode, typical, dB	3.0
Return Loss - Bypass Mode, typical, dB	14
TX Band Rejection, minimum, dB	75

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880
Bandwidth, MHz	75.00
Insertion Loss, maximum, dB	0.70
Insertion Loss, typical, dB	0.40
Insertion Loss Ripple, maximum, dB	0.50
Group Delay Variation, maximum, ns	13
Group Delay Variation Bandwidth, MHz	5.00
Total Group Delay, maximum, ns	45
Return Loss, minimum, dB	18
RX Band Rejection, minimum, dB	45
Input Power, RMS, maximum, W	200
Input Power, PEP, maximum, W	5,000
3rd Order PIM, typical, dBc	-163
3rd Order PIM Test Method	Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Material Specifications

Finish

Painted

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	2.8 L
Weight, net	4.5 kg \| 9.921 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	225 mm \| 8.858 in
Width	227 mm \| 8.937 in
Depth	56 mm \| 2.205 in
Ground Screw Diameter	8 mm \| 0.315 in
Mounting Pipe Diameter Range	40–160 mm

Electrical Specifications

License Band, LNA	DCS 1800
Voltage	9 Vdc

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Operating Current at Voltage	110 mA @ 12 V
Operating Current Tolerance	±20 mA
Voltage	7–30 Vdc
Voltage, CWA Mode	10–18 Vdc
Alarm Current, CWA Mode	195 mA ±15 mA

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2
Branch	1
Port Designation	ANT
License Band	DCS 1800, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785
Bandwidth, MHz	75.00
Gain, nominal, dB	12.0
Gain Tolerance, dB	±1
Noise Figure, maximum, dB	1.8
Noise Figure, typical, dB	1.4
Group Delay Variation, maximum, ns	50
Group Delay Variation Bandwidth, MHz	5.00
Total Group Delay, maximum, ns	150
Return Loss, minimum, dB	18
Insertion Loss - Bypass Mode, typical, dB	3.0
Return Loss - Bypass Mode, typical, dB	14
TX Band Rejection, minimum, dB	75

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880
Bandwidth, MHz	75.00
Insertion Loss, maximum, dB	0.70
Insertion Loss, typical, dB	0.40
Insertion Loss Ripple, maximum, dB	0.50
Group Delay Variation, maximum, ns	13
Group Delay Variation Bandwidth, MHz	5.00
Total Group Delay, maximum, ns	45
Return Loss, minimum, dB	18
RX Band Rejection, minimum, dB	45
Input Power, RMS, maximum, W	200
Input Power, PEP, maximum, W	5,000
3rd Order PIM, typical, dBc	-163
3rd Order PIM Test Method	Two +43 dBm carriers

Material Specifications

Finish

Painted

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67