Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

NHHSS-65C-R4BD

10-port sector antenna, 2x 698-894, 4x 1695–2360 and 4x 3100-4000 MHz, 65° HPBW, 4x RETs and 2x SBTs.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Perfect antenna to add 3.5GHz CBRS to macro sites
  • 18dBi max CBRS gain to align with FCC max EIRP limitations
  • Internal SBT on low and mid band allow remote RET control from the radio over the RF jumper cable
  • Separate RS-485 RET input/output for low and mid band
  • Interleaved dipole technology providing for attractive, low wind load mechanical package
  • Two LB RET and one MB RET. Both mid bands are controlled by one RET to ensure same tilt level for 4x MIMO
  • The low band array is internally diplexed for an independent tilt at 700 MHz and 850 MHz

General Specifications

Antenna Type Sector with internal RET and bias tee
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 3
Internal RET High band (1) | Low band (2) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 39.2 kg | 86.421 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 798 MHz | 824 – 894 MHz | 1695 – 2360 MHz | 3100 – 4000 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2 P1,P2 P1,P2 P1,P2
Frequency Band, MHz 698–798 824–894 1695–1880 1850–1990 1920–2200 2200–2360 3100–3550 3550–3700 3700–4000
RF Port 1,2 1,2 3,4,5,6 3,4,5,6 3,4,5,6 3,4,5,6 7,8,9,10 7,8,9,10 7,8,9,10
Gain, dBi 15.5 15.7 18.1 18.6 18.6 18.7 17.5 17.9 17.9
Beamwidth, Horizontal, degrees 64 61 62 58 61 69 57 54 56
Beamwidth, Vertical, degrees 9.1 7.8 5.5 5.1 4.8 4.5 5.7 5.3 5.1
Beam Tilt, degrees 0–11 0–11 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 20 15 17 19 20 20 17 19 20
Front-to-Back Ratio at 180°, dB 34 37 32 36 36 35 35 33 32
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 25 25 25 25 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -145 -145 -145
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200 100 100 100

Mechanical Specifications

Wind Loading @ Velocity, frontal 425.0 N @ 150 km/h (95.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 361.0 N @ 150 km/h (81.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 900.0 N @ 150 km/h (202.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 451.0 N @ 150 km/h (101.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2585 mm | 101.772 in
Weight, gross 53.4 kg | 117.727 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector with internal RET and bias tee
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 3
Internal RET High band (1) | Low band (2) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 39.2 kg | 86.421 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 798 MHz | 824 – 894 MHz | 1695 – 2360 MHz | 3100 – 4000 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2 P1,P2 P1,P2 P1,P2
Frequency Band, MHz 698–798 824–894 1695–1880 1850–1990 1920–2200 2200–2360 3100–3550 3550–3700 3700–4000
RF Port 1,2 1,2 3,4,5,6 3,4,5,6 3,4,5,6 3,4,5,6 7,8,9,10 7,8,9,10 7,8,9,10
Gain, dBi 15.5 15.7 18.1 18.6 18.6 18.7 17.5 17.9 17.9
Beamwidth, Horizontal, degrees 64 61 62 58 61 69 57 54 56
Beamwidth, Vertical, degrees 9.1 7.8 5.5 5.1 4.8 4.5 5.7 5.3 5.1
Beam Tilt, degrees 0–11 0–11 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 20 15 17 19 20 20 17 19 20
Front-to-Back Ratio at 180°, dB 34 37 32 36 36 35 35 33 32
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 25 25 25 25 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -145 -145 -145
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200 100 100 100

Mechanical Specifications

Wind Loading @ Velocity, frontal 425.0 N @ 150 km/h (95.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 361.0 N @ 150 km/h (81.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 900.0 N @ 150 km/h (202.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 451.0 N @ 150 km/h (101.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2585 mm | 101.772 in
Weight, gross 53.4 kg | 117.727 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification