Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

884031194/10 | CS31R GRY C6 4/23 U/UTP RIB 305M

Base Product: CS31R

  • Available in:
  • Asia

CS31 Category 6 U/UTP Cable, non-plenum, gray jacket, 4 pair count, 1000 ft (305 m) length reel-in-box

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

Product Classification

Regional Availability Asia
Portfolio NETCONNECT®
Product Type Twisted pair cable
Ordering Note Available in Asia Pacific

General Specifications

Product Number CS31R
ANSI/TIA Category 6
Cable Component Type Horizontal
Cable Type U/UTP (unshielded)
Conductor Type, singles Solid
Conductors, quantity 8
Jacket Color Gray
Note All electrical transmission tests include swept frequency measurements
Pairs, quantity 4
Separator Type Isolator
Supported Application 1000BASE-T | 1000BASE-TX | 100BASE-TX | 10BASE-T | 155Mbps ATM | TP-PMD | Token Ring | VoIP
Transmission Standards ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | IEC 61156-5 | ISO/IEC 11801 Class E

Dimensions

Cable Length 304.8 m | 1000 ft
Diameter Over Insulated Conductor 0.980 mm | 0.0386 in
Diameter Over Jacket, nominal 5.751 mm | 0.2264 in
Conductor Gauge, singles 23 AWG

Cross Section Drawing

Click on image to enlarge.

Electrical Specifications

Characteristic Impedance 100 ohm
dc Resistance Unbalance, maximum 5 %
dc Resistance, maximum 8 ohms/100 m | 2.438 ohms/100 ft
Delay Skew, maximum 45 ns
Dielectric Strength, minimum 1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency 5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP) 68 %
Operating Frequency, maximum 250 MHz
Operating Voltage, maximum 80 V
Propagation Delay, maximum 536 ns/100m @250MHz
Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Electrical Cable Performance

CS
CommScope
Std
Refers to the standard value listed under Transmission Standards in the Electrical Specifications above
Typ
Typical
IL
Insertion Loss (dB/100m)
NEXT
Near End Crosstalk (dB/100m)
ACR
Attenuation to Crosstalk Ratio (dB/100m))
PSNEXT
Power Sum Near End Crosstalk (db/100m)
PSACR
Power Sum Attenuation to Crosstalk Ratio (dB/100m)
ACRF
Attenuation to Crosstalk Ratio - Far End (dB/100m)
PSACRF
Insertion Loss (dB/100m)
RL
Return Loss (dB)
Frequency IL, CS IL, STD NEXT, CS NEXT, STD ACR, CS ACR, STD PSNEXT, CS PSNEXT, STD PSACR, CS PSACR, STD ACRF, CS ACRF, STD PSACRF, CS PSACRF, STD RL, CS RL, STD TCL, CS TCL, STD ELTCTL, CS ELTCTL, STD
1.00 MHz 2.0 2.0 75.3 74.3 73.3 72.3 72.3 72.3 70.3 70.3 68.0 67.8 65.0 64.8 20.0 20.0 40.0 40.0 35.0 35.0
4.00 MHz 3.8 3.8 66.3 65.3 62.5 61.5 63.3 63.3 59.5 59.5 56.0 55.8 53.0 52.8 23.0 23.0 40.0 40.0 23.0 23.0
8.00 MHz 5.3 5.3 61.8 60.8 56.4 55.4 58.8 58.8 53.4 53.4 49.9 49.7 46.9 46.7 24.5 24.5 40.0 40.0 16.9 16.9
10.00 MHz 6.0 6.0 60.3 59.3 54.3 53.3 57.3 57.3 51.3 51.3 48.0 47.8 45.0 44.8 25.0 25.0 40.0 40.0 15.0 15.0
16.00 MHz 7.6 7.6 57.2 56.2 49.7 48.7 54.2 54.2 46.7 46.7 43.9 43.7 40.9 40.7 25.0 25.0 38.0 38.0 10.9 10.9
20.00 MHz 8.5 8.5 55.8 54.8 47.3 46.3 52.8 52.8 44.3 44.3 42.0 41.8 39.0 38.8 25.0 25.0 37.0 37.0 9.0 9.0
25.00 MHz 9.5 9.5 54.3 53.3 44.8 43.8 51.3 51.3 41.8 41.8 40.0 39.8 37.0 36.8 24.3 24.3 36.0 36.0 7.0 7.0
31.25 MHz 10.7 10.7 52.9 51.9 42.2 41.2 49.9 49.9 39.2 39.2 38.1 37.9 35.1 34.9 23.6 23.6 35.1 35.1
62.50 MHz 15.4 15.4 48.4 47.4 33.0 32.0 45.4 45.4 30.0 30.0 32.1 31.9 29.1 28.9 21.5 21.5 32.0 32.0
100.00 MHz 19.8 19.8 45.3 44.3 25.5 24.5 42.3 42.3 22.5 22.5 28.0 27.8 25.0 24.8 20.1 20.1 30.0 30.0
155.00 MHz 25.2 25.2 42.4 41.4 17.3 16.3 39.4 39.4 14.3 14.3 24.2 24.0 21.2 21.0 18.8 18.8 28.1 28.1
200.00 MHz 29.0 29.0 40.8 39.8 11.8 10.8 37.8 37.8 8.8 8.8 22.0 21.8 19.0 18.8 18.0 18.0 27.0 27.0
250.00 MHz 32.8 32.8 39.3 38.3 6.5 5.5 36.3 36.3 3.5 3.5 20.0 19.8 17.0 16.8 17.3 17.3 26.0 26.0

Material Specifications

Conductor Material Bare copper
Insulation Material Polyolefin
Jacket Material PVC
Separator Material Polyolefin

Mechanical Specifications

Minimum Bend Radius Note 4 times the outer cable diameter
Pulling Tension, maximum 11.34 kg | 25 lb
Transportation Vibration Standard ISTA-1A

Environmental Specifications

Installation temperature 0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)
Storage Temperature -20 °C to +80 °C (-4 °F to +176 °F)
Environmental Space Non-plenum
Flame Test Method CMR | NEC Article 800 | UL 1666 | UL 444

Packaging and Weights

Cable weight 38.543 kg/km | 25.9 lb/kft
Packaging Type CommPak® box

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Product Classification

Regional Availability Asia
Portfolio NETCONNECT®
Product Type Twisted pair cable
Ordering Note Available in Asia Pacific

General Specifications

Product Number CS31R
ANSI/TIA Category 6
Cable Component Type Horizontal
Cable Type U/UTP (unshielded)
Conductor Type, singles Solid
Conductors, quantity 8
Jacket Color Gray
Note All electrical transmission tests include swept frequency measurements
Pairs, quantity 4
Separator Type Isolator
Supported Application 1000BASE-T | 1000BASE-TX | 100BASE-TX | 10BASE-T | 155Mbps ATM | TP-PMD | Token Ring | VoIP
Transmission Standards ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | IEC 61156-5 | ISO/IEC 11801 Class E

Dimensions

Cable Length 304.8 m | 1000 ft
Diameter Over Insulated Conductor 0.980 mm | 0.0386 in
Diameter Over Jacket, nominal 5.751 mm | 0.2264 in
Conductor Gauge, singles 23 AWG

Electrical Specifications

Characteristic Impedance 100 ohm
dc Resistance Unbalance, maximum 5 %
dc Resistance, maximum 8 ohms/100 m | 2.438 ohms/100 ft
Delay Skew, maximum 45 ns
Dielectric Strength, minimum 1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency 5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP) 68 %
Operating Frequency, maximum 250 MHz
Operating Voltage, maximum 80 V
Propagation Delay, maximum 536 ns/100m @250MHz
Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Electrical Cable Performance

CS
CommScope
Std
Refers to the standard value listed under Transmission Standards in the Electrical Specifications above
Typ
Typical
IL
Insertion Loss (dB/100m)
NEXT
Near End Crosstalk (dB/100m)
ACR
Attenuation to Crosstalk Ratio (dB/100m))
PSNEXT
Power Sum Near End Crosstalk (db/100m)
PSACR
Power Sum Attenuation to Crosstalk Ratio (dB/100m)
ACRF
Attenuation to Crosstalk Ratio - Far End (dB/100m)
PSACRF
Insertion Loss (dB/100m)
RL
Return Loss (dB)
Frequency IL, CS IL, STD NEXT, CS NEXT, STD ACR, CS ACR, STD PSNEXT, CS PSNEXT, STD PSACR, CS PSACR, STD ACRF, CS ACRF, STD PSACRF, CS PSACRF, STD RL, CS RL, STD TCL, CS TCL, STD ELTCTL, CS ELTCTL, STD
1.00 MHz 2.0 2.0 75.3 74.3 73.3 72.3 72.3 72.3 70.3 70.3 68.0 67.8 65.0 64.8 20.0 20.0 40.0 40.0 35.0 35.0
4.00 MHz 3.8 3.8 66.3 65.3 62.5 61.5 63.3 63.3 59.5 59.5 56.0 55.8 53.0 52.8 23.0 23.0 40.0 40.0 23.0 23.0
8.00 MHz 5.3 5.3 61.8 60.8 56.4 55.4 58.8 58.8 53.4 53.4 49.9 49.7 46.9 46.7 24.5 24.5 40.0 40.0 16.9 16.9
10.00 MHz 6.0 6.0 60.3 59.3 54.3 53.3 57.3 57.3 51.3 51.3 48.0 47.8 45.0 44.8 25.0 25.0 40.0 40.0 15.0 15.0
16.00 MHz 7.6 7.6 57.2 56.2 49.7 48.7 54.2 54.2 46.7 46.7 43.9 43.7 40.9 40.7 25.0 25.0 38.0 38.0 10.9 10.9
20.00 MHz 8.5 8.5 55.8 54.8 47.3 46.3 52.8 52.8 44.3 44.3 42.0 41.8 39.0 38.8 25.0 25.0 37.0 37.0 9.0 9.0
25.00 MHz 9.5 9.5 54.3 53.3 44.8 43.8 51.3 51.3 41.8 41.8 40.0 39.8 37.0 36.8 24.3 24.3 36.0 36.0 7.0 7.0
31.25 MHz 10.7 10.7 52.9 51.9 42.2 41.2 49.9 49.9 39.2 39.2 38.1 37.9 35.1 34.9 23.6 23.6 35.1 35.1
62.50 MHz 15.4 15.4 48.4 47.4 33.0 32.0 45.4 45.4 30.0 30.0 32.1 31.9 29.1 28.9 21.5 21.5 32.0 32.0
100.00 MHz 19.8 19.8 45.3 44.3 25.5 24.5 42.3 42.3 22.5 22.5 28.0 27.8 25.0 24.8 20.1 20.1 30.0 30.0
155.00 MHz 25.2 25.2 42.4 41.4 17.3 16.3 39.4 39.4 14.3 14.3 24.2 24.0 21.2 21.0 18.8 18.8 28.1 28.1
200.00 MHz 29.0 29.0 40.8 39.8 11.8 10.8 37.8 37.8 8.8 8.8 22.0 21.8 19.0 18.8 18.0 18.0 27.0 27.0
250.00 MHz 32.8 32.8 39.3 38.3 6.5 5.5 36.3 36.3 3.5 3.5 20.0 19.8 17.0 16.8 17.3 17.3 26.0 26.0

Material Specifications

Conductor Material Bare copper
Insulation Material Polyolefin
Jacket Material PVC
Separator Material Polyolefin

Mechanical Specifications

Minimum Bend Radius Note 4 times the outer cable diameter
Pulling Tension, maximum 11.34 kg | 25 lb
Transportation Vibration Standard ISTA-1A

Environmental Specifications

Installation temperature 0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)
Storage Temperature -20 °C to +80 °C (-4 °F to +176 °F)
Environmental Space Non-plenum
Flame Test Method CMR | NEC Article 800 | UL 1666 | UL 444

Packaging and Weights

Cable weight 38.543 kg/km | 25.9 lb/kft
Packaging Type CommPak® box
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Building Information Modeling (BIM) Objects

Product Specification

Building Information Modeling (BIM) Objects

Product Specification