1. 主页
  2. 产品类型
  3. 机柜、配线板、接头盒和电源
  4. 框架、机架和机柜

背面安装框架

光纤配线集线器

光纤进缆机柜

开放框架机架

光纤配线架（ODF）

框架和机架配件

框架和机架的线缆管理

康普提供各种框架、机架和机柜，旨在为中心机房、前端或交换机等室内光纤设施以及室外机柜提供卓越的线缆管理和弯曲半径保护，帮助您管理数以百计乃至成千上万的光纤连接。我们的解决方案种类繁多，从光纤入口机柜(FEC)到通过高密度光纤配线架(ODF)进入设施的拼接电缆，应有尽有。这些光纤配线架旨在互连或交叉连接多个框架和大型产品系列中的大量光纤。

使用光纤线槽解决方案，可将光纤引入19英寸的开放式机架中，该机架可安装电子设备和光纤面板。康普提供全系列光纤电缆组件，以支持各种应用。

  • OMX和FEC产品使用便捷托盘或抽屉，可快速接入入口设施连接。对于较小的设施，我们的BUDI墙盒提供紧凑的解决方案
  • FACT ODF采用轻巧的模块化框架，可进行墙面式安装，提供全面的前端可访问性、免工具安装和超高密度连接
  • NG4access ODF具备灵活性和行业领先的密度，具有全面的前后访问功能
  • FiberGuide提供卓越的光纤线槽解决方案

Products

/2341 个搜寻结果
查看：
对比

类别

过滤器

CS8893-000 | FIST-SOSA2-5SE-A CS8893-000 | FIST-SOSA2-5SE-A
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder
CS8893-000 | FIST-SOSA2-5SE-A
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: ANT
  • Splice Tray Construction: SE (for up to 12 primary or 4 secondary coated fibers)
SpecificationsSpecs
CS8893-000 | FIST-SOSA2-5SE-A
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: ANT
  • Splice Tray Construction: SE (for up to 12 primary or 4 secondary coated fibers)
  • Regional Availability: EMEA
CS8895-000 | FIST-SOSA2-5SE-S CS8895-000 | FIST-SOSA2-5SE-S
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder
CS8895-000 | FIST-SOSA2-5SE-S
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SE (for up to 12 primary or 4 secondary coated fibers)
SpecificationsSpecs
CS8895-000 | FIST-SOSA2-5SE-S
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SE (for up to 12 primary or 4 secondary coated fibers)
  • Regional Availability: EMEA
CS9084-000 | FIST-GR3-P-300-22 CS9084-000 | FIST-GR3-P-300-22
Variant of FIST-GR-ACC
FIST® GR3 Set of 2 side/back panels, 2200mm high, 300mm wide, gray
CS9084-000 | FIST-GR3-P-300-22
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FACT | FIST-GR3
  • Product Type: Side/back panel
SpecificationsSpecs
CS9084-000 | FIST-GR3-P-300-22
  • Product Brand: FIST®
  • Product Series: FACT | FIST-GR3
  • Product Type: Side/back panel
  • Regional Availability: EMEA
CU5583-000 | FIST-SOSA2-4SLE-S CU5583-000 | FIST-SOSA2-4SLE-S
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 4 slim element trays, each for holding up to 12 primary coated fibers, with Heat Shrink type splice holder
CU5583-000 | FIST-SOSA2-4SLE-S
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
SpecificationsSpecs
CU5583-000 | FIST-SOSA2-4SLE-S
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
  • Regional Availability: EMEA
CU5584-000 | FIST-SOSA2-8SLE-S CU5584-000 | FIST-SOSA2-8SLE-S
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 8 slim element trays, each for holding up to 12 primary coated fibers, with Heat Shrink type splice holder
CU5584-000 | FIST-SOSA2-8SLE-S
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
SpecificationsSpecs
CU5584-000 | FIST-SOSA2-8SLE-S
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
  • Regional Availability: EMEA
CU5585-000 | FIST-SOSA2-4SLE-C CU5585-000 | FIST-SOSA2-4SLE-C
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 4 slim element trays, each for holding up to 9 primary coated fibers, with Heat Shrink type splice holder and universal 1x8 splitter holder
CU5585-000 | FIST-SOSA2-4SLE-C
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
SpecificationsSpecs
CU5585-000 | FIST-SOSA2-4SLE-C
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
  • Regional Availability: EMEA
CU5586-000 | FIST-SOSA2-8SLE-C CU5586-000 | FIST-SOSA2-8SLE-C
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 8 slim element trays, each for holding up to 9 primary coated fibers, with Heat Shrink type splice holder and universal 1x8 splitter holder
CU5586-000 | FIST-SOSA2-8SLE-C
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
SpecificationsSpecs
CU5586-000 | FIST-SOSA2-8SLE-C
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: SLE (Slim element tray for up to 12 primary coated fibers)
  • Regional Availability: EMEA
CU7947-000 | FIST-SOSA2-8SC-MS CU7947-000 | FIST-SOSA2-8SC-MS
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder
CU7947-000 | FIST-SOSA2-8SC-MS
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Micro heat shrink
  • Splice Tray Construction: SC (for up to 4 primary or 2 secondary coated fibers)
SpecificationsSpecs
CU7947-000 | FIST-SOSA2-8SC-MS
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Micro heat shrink
  • Splice Tray Construction: SC (for up to 4 primary or 2 secondary coated fibers)
  • Regional Availability: EMEA
CU8918-000 | FIST-SOSA2-8DC-S CU8918-000 | FIST-SOSA2-8DC-S
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
CU8918-000 | FIST-SOSA2-8DC-S
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: DC (Foldable dual circuit tray for up to 4 primary coated fibers)
SpecificationsSpecs
CU8918-000 | FIST-SOSA2-8DC-S
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: DC (Foldable dual circuit tray for up to 4 primary coated fibers)
  • Regional Availability: EMEA
CU8919-000 | FIST-SOSA2-4DC-S CU8919-000 | FIST-SOSA2-4DC-S
Variant of FIST-SPLICE-TRAYS
FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
CU8919-000 | FIST-SOSA2-4DC-S
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: DC (Foldable dual circuit tray for up to 4 primary coated fibers)
SpecificationsSpecs
CU8919-000 | FIST-SOSA2-4DC-S
  • Product Brand: FIST®
  • Product Series: FIST-SOSA2
  • Product Type: Fiber splice tray
  • Splice Tray Chip Type: Heat shrink
  • Splice Tray Construction: DC (Foldable dual circuit tray for up to 4 primary coated fibers)
  • Regional Availability: EMEA
CU9129-000 | FIST-PTK3 CU9129-000 | FIST-PTK3
Variant of FIST-CHASSIS-ACCESSORIES
FIST® Aramid yarn termination unit kit (4) with mounting bracket, plus (1) IFC bracket
CU9129-000 | FIST-PTK3
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Type: Cable termination kit
SpecificationsSpecs
CU9129-000 | FIST-PTK3
  • Product Brand: FIST®
  • Product Type: Cable termination kit
  • Regional Availability: EMEA
CU9733-000 | FIST-GR3-DEX400-300/300 CU9733-000 | FIST-GR3-DEX400-300/300
Variant of FIST-GR-ACC
FIST® GR3 Extension kit, for extending depth of rack from 300mm to 400mm for Side duct 300mm , Central section 600mm, Side duct 300mm
CU9733-000 | FIST-GR3-DEX400-300/300
  • Regional Availability: EMEA
  • Product Brand: FIST®
  • Product Series: FIST-GR3
  • Product Type: Extension kit
SpecificationsSpecs
CU9733-000 | FIST-GR3-DEX400-300/300
  • Product Brand: FIST®
  • Product Series: FIST-GR3
  • Product Type: Extension kit
  • Regional Availability: EMEA
对比
HcqP5f33jb6jFdUmd7cyFE
视频

FACT高密度光纤配线架

观看
ng4access-odf-platform-br-314120-en-hero400b
手册

NG4access ODF 平台
high-speed-migration-hero1-400b
高速网络升级平台

让您的网络为高速网络升级平台做好准备

排序方式：

过滤器

  • 目录：NG4access光纤配线架

    NG4access ODF专为快速部署、便捷连接而设计和配置，并将对网络造成的风险降至最低，同时还能重新配制，扩展网络和实施新服务。用NG4access安装和维护大量光纤更快、更容易、成本更低。
    下载

  • 手册：建筑引入设备解决方案

    建筑接入机柜是高级设计的关键部分，它是建筑接入的端接点，OSP 和 IFC 电缆在这里进行连接、管理、分配和保护。
    下载

  • 手册：OMX光纤配线架

    康普OMX解决方案能够在窄小空间中完成光纤拼接和接插。它是一种灵活的光纤配线架，让服务提供商能够快速响应客户不断变化的需求。
    下载

  • 手册：下一代光纤配线架

    康普的下一代框架 (NGF) 产品线具有光纤框架，其设计侧重于一流的线缆管理和使用便捷性，例如宽阔的线槽空间，便于铺设电缆和跳线，并可轻松与跳线连接器和存储器相连。
    下载

  • 目录：NGFB（黑色）光纤配线架

    下一代光纤配线架（NGF）是一个高密度、可靠的解决方案，用于设施中的主干光纤交叉连接。作为经过行业实践证明的设计，这一配线架是任何现代通信设施必不可少的，远超任何一种标准光纤产品。
    下载

  • 产品数据表：NETpodium 1671405-X机架系统

    康普的NETpodium机架系统用于在仅有19" 45U的占地面积中提供支持铜缆和光纤线缆管理所需的所有功能，以及有效的平台。
    下载

          排序方式：

          过滤器

          • 目录：NG4access光纤配线架

            NG4access ODF专为快速部署、便捷连接而设计和配置，并将对网络造成的风险降至最低，同时还能重新配制，扩展网络和实施新服务。用NG4access安装和维护大量光纤更快、更容易、成本更低。
            下载

          • 手册：建筑引入设备解决方案

            建筑接入机柜是高级设计的关键部分，它是建筑接入的端接点，OSP 和 IFC 电缆在这里进行连接、管理、分配和保护。
            下载

          • 手册：OMX光纤配线架

            康普OMX解决方案能够在窄小空间中完成光纤拼接和接插。它是一种灵活的光纤配线架，让服务提供商能够快速响应客户不断变化的需求。
            下载

          • 手册：下一代光纤配线架

            康普的下一代框架 (NGF) 产品线具有光纤框架，其设计侧重于一流的线缆管理和使用便捷性，例如宽阔的线槽空间，便于铺设电缆和跳线，并可轻松与跳线连接器和存储器相连。
            下载

          • 目录：NGFB（黑色）光纤配线架

            下一代光纤配线架（NGF）是一个高密度、可靠的解决方案，用于设施中的主干光纤交叉连接。作为经过行业实践证明的设计，这一配线架是任何现代通信设施必不可少的，远超任何一种标准光纤产品。
            下载

          • 产品数据表：NETpodium 1671405-X机架系统

            康普的NETpodium机架系统用于在仅有19" 45U的占地面积中提供支持铜缆和光纤线缆管理所需的所有功能，以及有效的平台。
            下载