Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

B-65B-R1VB

2-port sector antenna, 2x 380-470MHz, 65° HPBW, 1xRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Antenna solution for TETRA and LTE 450 band
  • With Remote Electrical Tilt (RET) functionality

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 500 mm | 19.685 in
Depth 180 mm | 7.087 in
Length 2002 mm | 78.819 in
Net Weight, antenna only 23.7 kg | 52.249 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 380 – 470 MHz
Polarization ±45°
Total Input Power, maximum 200 W

Electrical Specifications

R1 R1
Frequency Band, MHz 380–430 430–470
RF Port 1,2 1,2
Gain, dBi 13.4 13.9
Beamwidth, Horizontal, degrees 68 65
Beamwidth, Vertical, degrees 20.1 17.9
Beam Tilt, degrees 0–16 0–16
USLS (First Lobe), dB 17 16
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 25 28
Isolation, Cross Polarization, dB 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 100 100

Mechanical Specifications

Wind Loading @ Velocity, frontal 906.0 N @ 150 km/h (203.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 352.0 N @ 150 km/h (79.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,191.0 N @ 150 km/h (267.7 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 595 mm | 23.425 in
Depth, packed 300 mm | 11.811 in
Length, packed 2260 mm | 88.976 in
Weight, gross 36 kg | 79.366 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 500 mm | 19.685 in
Depth 180 mm | 7.087 in
Length 2002 mm | 78.819 in
Net Weight, antenna only 23.7 kg | 52.249 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 380 – 470 MHz
Polarization ±45°
Total Input Power, maximum 200 W

Electrical Specifications

R1 R1
Frequency Band, MHz 380–430 430–470
RF Port 1,2 1,2
Gain, dBi 13.4 13.9
Beamwidth, Horizontal, degrees 68 65
Beamwidth, Vertical, degrees 20.1 17.9
Beam Tilt, degrees 0–16 0–16
USLS (First Lobe), dB 17 16
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 25 28
Isolation, Cross Polarization, dB 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 100 100

Mechanical Specifications

Wind Loading @ Velocity, frontal 906.0 N @ 150 km/h (203.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 352.0 N @ 150 km/h (79.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,191.0 N @ 150 km/h (267.7 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 595 mm | 23.425 in
Depth, packed 300 mm | 11.811 in
Length, packed 2260 mm | 88.976 in
Weight, gross 36 kg | 79.366 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification