Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RR2VVT4-6533D-R7

20-port sector/multibeam antenna, 4x 694–960 MHz 65° HPBW and 8x 1710-2690MHz 4x33° HPBW, 8x 2300-2690MHz, 90° HPBW 7x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Enhances network capacity through six sectors on high band while maintaining low band coverage layer through three sectors with only three antenna faces
  • Also includes 1x 4-Column Array for 2300-2690 MHz with calibration port. Column spacing optimized to support Soft Split Beamforming
  • A calibration port is provided for the 4-Column Array. Seven Internal RET’s provide independent electrical tilt control for each array

General Specifications

Antenna Type Sector- and beamforming
Band Multiband
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (5) | Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 579 mm | 22.795 in
Depth 212 mm | 8.346 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 63.5 kg | 139.993 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1710 – 2690 MHz | 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,800 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain, dBi 16.0 16.4 16.7 18.5 19.3 19.8 20.5 16.2
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 69 62 60 33 32 31 27 99
Beamwidth, Vertical, degrees 8.7 8 7.2 7.4 7 6.6 5.4 5.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 20 18 18 18 18 19 18
Front-to-Back Ratio at 180°, dB 32 32 33 36 35 36 33 29
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 25 25 25 25 25
Isolation, Co-polarization, dB 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain by all Beam Tilts, average, dBi 15.7 16.2 16.4 17.7 18.7 19.3 19.9 15.7
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3 ±0.3 ±1.3 ±0.5 ±0.7 ±0.8 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±7 ±4 ±5 ±4 ±3 ±3 ±3 ±9
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.3 ±0.5 ±0.4 ±0.5 ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 15 16 14 14 16 17 16 16
Front-to-Back Total Power at 180° ± 30°, dB 26 25 25 30 30 31 28 23
CPR at Boresight, dB 17 19 19 14 16 19 20 16
CPR at Sector, dB 9 6 7 9
CPR at 10 dB Horizontal Beamwidth, dB 6 9 11 13

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain, dBi 17.6
Beamwidth, Horizontal, degrees 64
Beamwidth, Vertical, degrees 5.1
Front-to-Back Total Power at 180° ± 30°, dB 25
USLS (First Lobe), dB 18

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Steered 0° Gain, dBi 21.5
Steered 0° Beamwidth, Horizontal, degrees 26
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 31
Steered 0° USLS (First Lobe), dB 21
Steered 30° Gain, dBi 20.8
Steered 30° Beamwidth, Horizontal, degrees 28
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 28

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain, dBi 20.5
Beamwidth, Horizontal, degrees 33
Front-to-Back Total Power at 180° ± 30°, dB 30
Horizontal Sidelobe, dB 20
USLS (First Lobe), dB 20

Mechanical Specifications

Wind Loading @ Velocity, frontal 764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 328.0 N @ 150 km/h (73.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,220.0 N @ 150 km/h (274.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 774.0 N @ 150 km/h (174.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 681 mm | 26.811 in
Depth, packed 368 mm | 14.488 in
Length, packed 2827 mm | 111.299 in
Weight, gross 82 kg | 180.779 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector- and beamforming
Band Multiband
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (5) | Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 579 mm | 22.795 in
Depth 212 mm | 8.346 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 63.5 kg | 139.993 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1710 – 2690 MHz | 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,800 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain, dBi 16.0 16.4 16.7 18.5 19.3 19.8 20.5 16.2
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 69 62 60 33 32 31 27 99
Beamwidth, Vertical, degrees 8.7 8 7.2 7.4 7 6.6 5.4 5.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 20 18 18 18 18 19 18
Front-to-Back Ratio at 180°, dB 32 32 33 36 35 36 33 29
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 25 25 25 25 25
Isolation, Co-polarization, dB 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain by all Beam Tilts, average, dBi 15.7 16.2 16.4 17.7 18.7 19.3 19.9 15.7
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3 ±0.3 ±1.3 ±0.5 ±0.7 ±0.8 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±7 ±4 ±5 ±4 ±3 ±3 ±3 ±9
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.3 ±0.5 ±0.4 ±0.5 ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 15 16 14 14 16 17 16 16
Front-to-Back Total Power at 180° ± 30°, dB 26 25 25 30 30 31 28 23
CPR at Boresight, dB 17 19 19 14 16 19 20 16
CPR at Sector, dB 9 6 7 9
CPR at 10 dB Horizontal Beamwidth, dB 6 9 11 13

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain, dBi 17.6
Beamwidth, Horizontal, degrees 64
Beamwidth, Vertical, degrees 5.1
Front-to-Back Total Power at 180° ± 30°, dB 25
USLS (First Lobe), dB 18

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Steered 0° Gain, dBi 21.5
Steered 0° Beamwidth, Horizontal, degrees 26
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 31
Steered 0° USLS (First Lobe), dB 21
Steered 30° Gain, dBi 20.8
Steered 30° Beamwidth, Horizontal, degrees 28
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 28

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 890–960 1710–1880 1850–1990 1920–2180 2300–2690 2300–2690
Gain, dBi 20.5
Beamwidth, Horizontal, degrees 33
Front-to-Back Total Power at 180° ± 30°, dB 30
Horizontal Sidelobe, dB 20
USLS (First Lobe), dB 20

Mechanical Specifications

Wind Loading @ Velocity, frontal 764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 328.0 N @ 150 km/h (73.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,220.0 N @ 150 km/h (274.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 774.0 N @ 150 km/h (174.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 681 mm | 26.811 in
Depth, packed 368 mm | 14.488 in
Length, packed 2827 mm | 111.299 in
Weight, gross 82 kg | 180.779 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification