0 Alternative products available

RR-85D-R2N43

4-port sector antenna, 4x 694–960 MHz, 85° HPBW, 2x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Specifications

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Click on image to enlarge.

Frequency Band, MHz	698–806	790–862	824–894	880–960
Gain, dBi	15.6	16.2	16.4	16.7
Beamwidth, Horizontal, degrees	89	81	81	77
Beamwidth, Vertical, degrees	8.3	7.7	7.4	7
Beam Tilt, degrees	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	18	19	19	18
Front-to-Back Ratio at 180°, dB	30	33	33	28
Isolation, Cross Polarization, dB	27	27	27	27
Isolation, Inter-band, dB	27	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	300

Frequency Band, MHz	698–806	790–862	824–894	880–960
Gain by all Beam Tilts, average, dBi	15.3	15.9	16.2	16.4
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.4	±0.4	±0.3
Beamwidth, Horizontal Tolerance, degrees	±10.1	±4.4	±3.5	±5.5
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.4	±0.4
USLS, beampeak to 20° above beampeak, dB	14	14	16	16
Front-to-Back Total Power at 180° ± 30°, dB	23	24	25	24
CPR at Boresight, dB	25	26	26	25
CPR at Sector, dB	13	12	13	13

Wind Loading @ Velocity, frontal	680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,023.0 N @ 150 km/h (230.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Frequency Band, MHz	698–806	790–862	824–894	880–960
Gain, dBi	15.6	16.2	16.4	16.7
Beamwidth, Horizontal, degrees	89	81	81	77
Beamwidth, Vertical, degrees	8.3	7.7	7.4	7
Beam Tilt, degrees	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	18	19	19	18
Front-to-Back Ratio at 180°, dB	30	33	33	28
Isolation, Cross Polarization, dB	27	27	27	27
Isolation, Inter-band, dB	27	27	27	27
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	300

Frequency Band, MHz	698–806	790–862	824–894	880–960
Gain by all Beam Tilts, average, dBi	15.3	15.9	16.2	16.4
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.4	±0.4	±0.3
Beamwidth, Horizontal Tolerance, degrees	±10.1	±4.4	±3.5	±5.5
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.4	±0.4
USLS, beampeak to 20° above beampeak, dB	14	14	16	16
Front-to-Back Total Power at 180° ± 30°, dB	23	24	25	24
CPR at Boresight, dB	25	26	26	25
CPR at Sector, dB	13	12	13	13

Wind Loading @ Velocity, frontal	680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,023.0 N @ 150 km/h (230.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Click on image to enlarge.

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant