For other alternatives, please contact us for more information.

0 Alternative products available

RR-65C-R2VB-V2

4-port sector antenna, 4x 694–960 MHz, 65° HPBW, 2x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

All Internal RET actuators are connected in “Cascaded SRET” configuration
Retractable tilt indicator rods
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

Specifications

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	427 mm \| 16.811 in
Depth	157 mm \| 6.181 in
Length	2497 mm \| 98.307 in
Net Weight, antenna only	27.6 kg \| 60.848 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz
Polarization	±45°
Total Input Power, maximum	800 W

Electrical Specifications

Frequency Band, MHz	694–790	790–890	890–960
Gain, dBi	16.1	16.5	16.8
Beamwidth, Horizontal, degrees	66	61	58
Beamwidth, Vertical, degrees	8.7	7.9	7.4
Beam Tilt, degrees	0–10	0–10	0–10
USLS (First Lobe), dB	22	25	26
Front-to-Back Ratio, Copolarization 180° ± 30°, dB	27	29	28
Isolation, Cross Polarization, dB	25	25	25
Isolation, Inter-band, dB	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153
Input Power per Port, maximum, watts	300	300	300

Electrical Specifications, BASTA

Frequency Band, MHz	694–790	790–890	890–960
Gain by all Beam Tilts, average, dBi	15.8	16.2	16.6
Gain by all Beam Tilts Tolerance, dB	±0.4	±0.3	±0.3
Beamwidth, Horizontal Tolerance, degrees	±4.9	±3	±4.1
Beamwidth, Vertical Tolerance, degrees	±0.4	±0.5	±0.2
CPR at Boresight, dB	24	25	25

Mechanical Specifications

Wind Loading @ Velocity, frontal	965.0 N @ 150 km/h (216.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	402.0 N @ 150 km/h (90.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	1,174.0 N @ 150 km/h (263.9 lbf @ 150 km/h)
Wind Speed, maximum	200 km/h (124 mph)

Packaging and Weights

Width, packed	522 mm \| 20.551 in
Depth, packed	277 mm \| 10.906 in
Length, packed	2697 mm \| 106.181 in
Weight, gross	38.8 kg \| 85.539 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	427 mm \| 16.811 in
Depth	157 mm \| 6.181 in
Length	2497 mm \| 98.307 in
Net Weight, antenna only	27.6 kg \| 60.848 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz
Polarization	±45°
Total Input Power, maximum	800 W

Electrical Specifications

Frequency Band, MHz	694–790	790–890	890–960
Gain, dBi	16.1	16.5	16.8
Beamwidth, Horizontal, degrees	66	61	58
Beamwidth, Vertical, degrees	8.7	7.9	7.4
Beam Tilt, degrees	0–10	0–10	0–10
USLS (First Lobe), dB	22	25	26
Front-to-Back Ratio, Copolarization 180° ± 30°, dB	27	29	28
Isolation, Cross Polarization, dB	25	25	25
Isolation, Inter-band, dB	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153
Input Power per Port, maximum, watts	300	300	300

Electrical Specifications, BASTA

Frequency Band, MHz	694–790	790–890	890–960
Gain by all Beam Tilts, average, dBi	15.8	16.2	16.6
Gain by all Beam Tilts Tolerance, dB	±0.4	±0.3	±0.3
Beamwidth, Horizontal Tolerance, degrees	±4.9	±3	±4.1
Beamwidth, Vertical Tolerance, degrees	±0.4	±0.5	±0.2
CPR at Boresight, dB	24	25	25

Mechanical Specifications

Wind Loading @ Velocity, frontal	965.0 N @ 150 km/h (216.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	402.0 N @ 150 km/h (90.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	1,174.0 N @ 150 km/h (263.9 lbf @ 150 km/h)
Wind Speed, maximum	200 km/h (124 mph)

Packaging and Weights

Width, packed	522 mm \| 20.551 in
Depth, packed	277 mm \| 10.906 in
Length, packed	2697 mm \| 106.181 in
Weight, gross	38.8 kg \| 85.539 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant