Warning Icon
This product will be discontinued on: December 30, 2024

For other alternatives, please contact us for more information.

1 Replacement products available
  • E12F03P88
    Twin Diplexer, 1800/2100-2600, dc block all ports, with 4.3-10 connectors

E11F03P88

Twin Diplexer, 1800/2100-2600, dc block all ports, with 7/16 DIN connectors

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Designed for network Modernization, introduction of LTE1800 on existing site
  • Designed for network modernization application, introduction of LTE2300 and LTE2600 on existing site
  • Twin configuration
  • dc/AISG blocking on all ports (DC open)

Product Classification

Product Type Diplexer

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female

Dimensions

Height 86 mm | 3.386 in
Width 109 mm | 4.291 in
Depth 139 mm | 5.472 in
Mounting Pipe Diameter Range 43–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
License Band, Band Pass DCS 1800 | IMT 2100 | IMT 2600 | WCS 2300

Electrical Specifications, dc Power/Alarm

dc/AISG Pass-through Method No dc/AISG pass-through
dc/AISG Pass-through, combiner dc/AISG blocking on all ports
dc/AISG Pass-through, demultiplexer dc/AISG blocking on all ports
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform

Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation PORT 1 1710-1880 PORT 2 1920-2690
License Band DCS 1800, Band Pass IMT 2100, Band Pass
IMT 2600, Band Pass
WCS 2300, Band Pass

Electrical Specifications, Band Pass

Frequency Range, MHz 1710–1880 1920–2690
Insertion Loss, typical, dB 0.15 0.15
Return Loss, typical, dB 22 22
Isolation, typical, dB 40 40
Input Power, RMS, maximum, W 250 250
Input Power, PEP, maximum, W 1,000 1,000
3rd Order PIM, typical, dBc -157 -157
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Environmental Test Method ETSI EN 300 019-1-4
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 1.3 L
Weight, with mounting hardware 2.5 kg | 5.512 lb
Weight, without mounting hardware 2.3 kg | 5.071 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type Diplexer

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female

Dimensions

Height 86 mm | 3.386 in
Width 109 mm | 4.291 in
Depth 139 mm | 5.472 in
Mounting Pipe Diameter Range 43–122 mm

Electrical Specifications

Impedance 50 ohm
License Band, Band Pass DCS 1800 | IMT 2100 | IMT 2600 | WCS 2300

Electrical Specifications, dc Power/Alarm

dc/AISG Pass-through Method No dc/AISG pass-through
dc/AISG Pass-through, combiner dc/AISG blocking on all ports
dc/AISG Pass-through, demultiplexer dc/AISG blocking on all ports
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform

Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation PORT 1 1710-1880 PORT 2 1920-2690
License Band DCS 1800, Band Pass IMT 2100, Band Pass; IMT 2600, Band Pass; WCS 2300, Band Pass

Electrical Specifications, Band Pass

Frequency Range, MHz 1710–1880 1920–2690
Insertion Loss, typical, dB 0.15 0.15
Return Loss, typical, dB 22 22
Isolation, typical, dB 40 40
Input Power, RMS, maximum, W 250 250
Input Power, PEP, maximum, W 1,000 1,000
3rd Order PIM, typical, dBc -157 -157
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Environmental Test Method ETSI EN 300 019-1-4
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 1.3 L
Weight, with mounting hardware 2.5 kg | 5.512 lb
Weight, without mounting hardware 2.3 kg | 5.071 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence