0 Alternative products available

RVVPX306.11B-T2

6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 65° HPBW, 3x RET with manual override and SBT on every RF port

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Each port has an integrated bias tee, and each band has its own smart switch that automatically selects between bias tee or AISG inputs according to a predetermined priority table
All Internal RET actuators are in SRET configuration, with dedicated AISG ports for each band

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Grounding Type	RF connector body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	7-16 DIN Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, mid band	0
RF Connector Quantity, low band	2
RF Connector Quantity, total	6

RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 3 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Port 1 \| Port 2 \| Port 3 \| Port 4 \| Port 5 \| Port 6
Internal RET	High band (2) \| Low band (1)
Power Consumption, idle state, maximum	2 W
Power Consumption, normal conditions, maximum	13 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	350 mm \| 13.78 in
Depth	208 mm \| 8.189 in
Length	1584 mm \| 62.362 in
Net Weight, without mounting kit	24.7 kg \| 54.454 lb

Click on image to enlarge.

Click on image to enlarge.
Click on image to enlarge.

Frequency Band, MHz	694–790	790–890	890–960	1695–1920	1920–2180	2300–2690
Gain, dBi	14.3	14.9	15.2	17.2	17.8	18.4
Beamwidth, Horizontal, degrees	69	67	66	62	62	64
Beamwidth, Vertical, degrees	16.5	14.6	13.6	7.5	6.7	5.5
Beam Tilt, degrees	2–12	2–12	2–12	0–10	0–10	0–10
USLS (First Lobe), dB	15	18	21	18	20	19
Front-to-Back Ratio at 180°, dB	30	32	33	36	37	38
Isolation, Cross Polarization, dB	27	27	27	28	28	28
Isolation, Inter-band, dB	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	150	150	150	150	150	100

Wind Loading @ Velocity, frontal	255.0 N @ 150 km/h (57.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	214.0 N @ 150 km/h (48.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	540.0 N @ 150 km/h (121.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	270.0 N @ 150 km/h (60.7 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

Antenna Type	Sector
Band	Multiband
Grounding Type	RF connector body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	7-16 DIN Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, mid band	0
RF Connector Quantity, low band	2
RF Connector Quantity, total	6

RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 3 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Port 1 \| Port 2 \| Port 3 \| Port 4 \| Port 5 \| Port 6
Internal RET	High band (2) \| Low band (1)
Power Consumption, idle state, maximum	2 W
Power Consumption, normal conditions, maximum	13 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	350 mm \| 13.78 in
Depth	208 mm \| 8.189 in
Length	1584 mm \| 62.362 in
Net Weight, without mounting kit	24.7 kg \| 54.454 lb

Frequency Band, MHz	694–790	790–890	890–960	1695–1920	1920–2180	2300–2690
Gain, dBi	14.3	14.9	15.2	17.2	17.8	18.4
Beamwidth, Horizontal, degrees	69	67	66	62	62	64
Beamwidth, Vertical, degrees	16.5	14.6	13.6	7.5	6.7	5.5
Beam Tilt, degrees	2–12	2–12	2–12	0–10	0–10	0–10
USLS (First Lobe), dB	15	18	21	18	20	19
Front-to-Back Ratio at 180°, dB	30	32	33	36	37	38
Isolation, Cross Polarization, dB	27	27	27	28	28	28
Isolation, Inter-band, dB	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	150	150	150	150	150	100

Wind Loading @ Velocity, frontal	255.0 N @ 150 km/h (57.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	214.0 N @ 150 km/h (48.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	540.0 N @ 150 km/h (121.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	270.0 N @ 150 km/h (60.7 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Click on image to enlarge.
Click on image to enlarge.

Click on image to enlarge.

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted