Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RVV65B-C3-3XR

6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 65° HPBW, 3x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 301 mm | 11.850 in
Depth 180 mm | 7.087 in
Length 1850 mm | 72.835 in
Net Weight, antenna only 23 kg | 50.706 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2500 2500–2690
Gain at Mid Tilt, dBi 15.0 15.4 15.4 17.8 18.8 19.2 19.1
Beamwidth, Horizontal, degrees 71 71 68 63 61 61 62
Beamwidth, Vertical, degrees 11.7 10.5 9.9 5.6 5 4.3 4.1
Beam Tilt, degrees 0–13 0–13 0–13 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 16 16 21 19 20 17
Front-to-Back Ratio at 180°, dB 29 34 30 30 33 35 32
Front-to-Back Total Power at 180° ± 30°, dB 23 24 23 24 26 27 25
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 281.0 N @ 150 km/h (63.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 247.0 N @ 150 km/h (55.5 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 618.0 N @ 150 km/h (138.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 286.0 N @ 150 km/h (64.3 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 2036 mm | 80.158 in
Weight, gross 34 kg | 74.957 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 301 mm | 11.850 in
Depth 180 mm | 7.087 in
Length 1850 mm | 72.835 in
Net Weight, antenna only 23 kg | 50.706 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2180 2300–2500 2500–2690
Gain at Mid Tilt, dBi 15.0 15.4 15.4 17.8 18.8 19.2 19.1
Beamwidth, Horizontal, degrees 71 71 68 63 61 61 62
Beamwidth, Vertical, degrees 11.7 10.5 9.9 5.6 5 4.3 4.1
Beam Tilt, degrees 0–13 0–13 0–13 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 16 16 21 19 20 17
Front-to-Back Ratio at 180°, dB 29 34 30 30 33 35 32
Front-to-Back Total Power at 180° ± 30°, dB 23 24 23 24 26 27 25
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 281.0 N @ 150 km/h (63.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 247.0 N @ 150 km/h (55.5 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 618.0 N @ 150 km/h (138.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 286.0 N @ 150 km/h (64.3 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 2036 mm | 80.158 in
Weight, gross 34 kg | 74.957 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted