LDX-6516DS1-VTM | LDX-6516DS1-A1M
2-port sector antenna, 2x 790–960 MHz, 65° HPBW, RET compatible
Specifications
Features and Benefits
- Engineered to provide wideband capability to support “Digital Dividend” band applications, future ready
- Same physical size as existing 800/900 MHz antennas for easy site zoning
- Proven core design technology, with over 1,000,000 similar antennas deployed
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 0 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 2 |
Remote Electrical Tilt (RET) Information
| Model with Factory Installed AISG 2.0 Actuator | LDX-6516DS1-A1M |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2582 mm | 101.654 in |
| Net Weight, without mounting kit | 20.2 kg | 44.533 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 790 – 960 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 500 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 790–896 | 870–960 |
| Gain, dBi | 17.3 | 17.6 |
| Beamwidth, Horizontal, degrees | 66 | 64 |
| Beamwidth, Vertical, degrees | 7.6 | 7.1 |
| Beam Tilt, degrees | 0–8 | 0–8 |
| USLS (First Lobe), dB | 19 | 21 |
| Front-to-Back Ratio at 180°, dB | 35 | 33 |
| Isolation, Cross Polarization, dB | 30 | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 | 1.4 | 15.6 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 421.0 N @ 150 km/h (94.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 810.0 N @ 150 km/h (182.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 427.0 N @ 150 km/h (96.0 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 392 mm | 15.433 in |
| Depth, packed | 295 mm | 11.614 in |
| Length, packed | 2718 mm | 107.008 in |
| Weight, gross | 37.8 kg | 83.335 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 0 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 2 |
Remote Electrical Tilt (RET) Information
| Model with Factory Installed AISG 2.0 Actuator | LDX-6516DS1-A1M |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2582 mm | 101.654 in |
| Net Weight, without mounting kit | 20.2 kg | 44.533 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 790 – 960 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 500 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 790–896 | 870–960 |
| Gain, dBi | 17.3 | 17.6 |
| Beamwidth, Horizontal, degrees | 66 | 64 |
| Beamwidth, Vertical, degrees | 7.6 | 7.1 |
| Beam Tilt, degrees | 0–8 | 0–8 |
| USLS (First Lobe), dB | 19 | 21 |
| Front-to-Back Ratio at 180°, dB | 35 | 33 |
| Isolation, Cross Polarization, dB | 30 | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 | 1.4 | 15.6 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 421.0 N @ 150 km/h (94.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 810.0 N @ 150 km/h (182.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 427.0 N @ 150 km/h (96.0 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 392 mm | 15.433 in |
| Depth, packed | 295 mm | 11.614 in |
| Length, packed | 2718 mm | 107.008 in |
| Weight, gross | 37.8 kg | 83.335 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Other Ways to Browse
