760251579 | FIST-EDSA2-D5H-V
Base Product: FIST-EDSA2
- Available in:
- Australia/New Zealand
- EMEA
- Latin America
FIST® EDSA2 Fiber Optic Splice Closure, Gel Cable Sealing, for high splice tray capacity, with test valve
Features and Benefits
- Single-ended base with two-latches dome design and reliable cable attachment system
- One oval shaped gel-sealed wrap around feeder port for up to two feeder cables or microtubes
- Four long oval-shaped gel-sealed wrap around drop ports for up to twelve drop cables each
- One round entry/exit port for use with multi-out gel seal kits
- Fast, easy and toolless installation based upon the FIST fiber management system
- Intuitive identification capabilities and full repair/upgrade possibilities
Specifications
Product Classification
| Regional Availability | Australia/New Zealand | EMEA | Latin America |
| Product Type | Single-ended, rectangular fiber closure |
| Product Brand | FIST® |
| Product Series | FIST-EDSA2 |
| Ordering Note | Splice tray kits, mounting bracket and drop seals to be ordered separately |
General Specifications
| Cable Entry Drop Port Style | Gel block |
| Cable Entry Main Port Style | Gel block |
| Cable Ports Quantity, total | 1 oval port (2 cables) + 5 multi-out ports (64 cables) |
| Cable Sealing Type | Compressed gel |
| Closure Sealing Type | Side latch |
| Closure Style | Single-ended |
| Color | Black |
| Flash Test Valve | Pre-installed |
| Mounting | Handhole | Manhole | Wall |
| Network Area Type | Distribution | Drop |
| Splice Tray Included, quantity | 0 |
| Splice Tray Type Included | No trays |
| Splicing Capacity, Single Fusion, maximum | 288 |
| Splicing Type, Supported | Single fusion |
Dimensions
| Height | 150 mm | 5.906 in |
| Width | 270 mm | 10.63 in |
| Length | 560 mm | 22.047 in |
| Main Cable Diameter, maximum | 16 mm | 0.63 in |
Dimension Drawing
| Click on image to enlarge. |
Splicing Configuration
| Click on image to enlarge. |
Material Specifications
| Material Type | Impact-resistant polymer |
Environmental Specifications
| Environmental Space | Above ground | Aerial | Below ground | Buried |
| Qualification Standards | IEC 60529, IP68 + 2 m waterhead |
| Water Resistance | 20 kPa |
Packaging and Weights
| Packaging quantity | 1 |
| Packaging Type | Box | Carton |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant/Exempted |
Product Classification
| Regional Availability | Australia/New Zealand | EMEA | Latin America |
| Product Type | Single-ended, rectangular fiber closure |
| Product Brand | FIST® |
| Product Series | FIST-EDSA2 |
| Ordering Note | Splice tray kits, mounting bracket and drop seals to be ordered separately |
General Specifications
| Cable Entry Drop Port Style | Gel block |
| Cable Entry Main Port Style | Gel block |
| Cable Ports Quantity, total | 1 oval port (2 cables) + 5 multi-out ports (64 cables) |
| Cable Sealing Type | Compressed gel |
| Closure Sealing Type | Side latch |
| Closure Style | Single-ended |
| Color | Black |
| Flash Test Valve | Pre-installed |
| Mounting | Handhole | Manhole | Wall |
| Network Area Type | Distribution | Drop |
| Splice Tray Included, quantity | 0 |
| Splice Tray Type Included | No trays |
| Splicing Capacity, Single Fusion, maximum | 288 |
| Splicing Type, Supported | Single fusion |
Dimensions
| Height | 150 mm | 5.906 in |
| Width | 270 mm | 10.63 in |
| Length | 560 mm | 22.047 in |
| Main Cable Diameter, maximum | 16 mm | 0.63 in |
Material Specifications
| Material Type | Impact-resistant polymer |
Environmental Specifications
| Environmental Space | Above ground | Aerial | Below ground | Buried |
| Qualification Standards | IEC 60529, IP68 + 2 m waterhead |
| Water Resistance | 20 kPa |
Packaging and Weights
| Packaging quantity | 1 |
| Packaging Type | Box | Carton |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Building Information Modeling (BIM) Objects
Installation Instruction
Product Specification
Video
FIST-EDSA2 64-Drop FTTH Splice Closure
FIST-EDSA2 64-Drop FTTH Splice Closure
Visio Stencil
Warranty
Building Information Modeling (BIM) Objects
Installation Instruction
Product Compliance Documentation
Product Specification
Video
FIST-EDSA2 64-Drop FTTH Splice Closure
FIST-EDSA2 64-Drop FTTH Splice Closure
Visio Stencil
Warranty
Related Products and Accessories
Related Products
Cabinets, Panels, Enclosures & Power
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
760250656 | FIST-RSKG-1-SIL FIST Gel Sealing Kit for round splice closure port, sealing 1 cable with diameter between 11 and 14 mm -
![]()
760250657 | FIST-RSKG-2-SIL FIST Gel Sealing Kit for round splice closure port, sealing 2 cables with diameter between 8 and 11 mm -
![]()
760250658 | FIST-RSKG-3-SIL FIST Gel Sealing Kit for round splice closure port, sealing 3 cables with diameter between 6.5 and 8 mm -
![]()
760250659 | FIST-RSKG-4-SIL FIST Gel Sealing Kit for round splice closure port, sealing 4 cables with diameter between 4 and 7 mm -
![]()
760250660 | FIST-RSKG-8-SIL FIST Gel Sealing Kit for round splice closure port, sealing 8 cables with diameter between 3 and 5 mm -
![]()
760250661 | FIST-RSKG-16-SIL FIST Gel Sealing Kit for round splice closure port, sealing 16 cables with diameter up to 3 mm -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
EG2461-000 | EDSA-MOBRA FIST® EDSA Mounting bracket for fiber closure -
![]()
EH0973-000 | EDSA-SKG12-5/8 FIST® EDSA gel sealing kit for fiber closure -
![]()
EH1005-000 | EDSA-DUMMY FIST® EDSA Dummy drop seal kit for fiber closure
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
Structural Support, Tools & Accessories
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
Related Products
Cabinets, Panels, Enclosures & Power
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
760250656 | FIST-RSKG-1-SIL FIST Gel Sealing Kit for round splice closure port, sealing 1 cable with diameter between 11 and 14 mm -
![]()
760250657 | FIST-RSKG-2-SIL FIST Gel Sealing Kit for round splice closure port, sealing 2 cables with diameter between 8 and 11 mm -
![]()
760250658 | FIST-RSKG-3-SIL FIST Gel Sealing Kit for round splice closure port, sealing 3 cables with diameter between 6.5 and 8 mm -
![]()
760250659 | FIST-RSKG-4-SIL FIST Gel Sealing Kit for round splice closure port, sealing 4 cables with diameter between 4 and 7 mm -
![]()
760250660 | FIST-RSKG-8-SIL FIST Gel Sealing Kit for round splice closure port, sealing 8 cables with diameter between 3 and 5 mm -
![]()
760250661 | FIST-RSKG-16-SIL FIST Gel Sealing Kit for round splice closure port, sealing 16 cables with diameter up to 3 mm -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
EG2461-000 | EDSA-MOBRA FIST® EDSA Mounting bracket for fiber closure -
![]()
EH0973-000 | EDSA-SKG12-5/8 FIST® EDSA gel sealing kit for fiber closure -
![]()
EH1005-000 | EDSA-DUMMY FIST® EDSA Dummy drop seal kit for fiber closure
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
Structural Support, Tools & Accessories
-
![]()
017242-000 | FIST-SOSA2-4SC-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
124962-000 | FIST-SOSA2-4SE-A FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
175414-000 | FIST-SOSA2-2SE-A FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
319072-000 | FIST-SOSA2-2R4/8-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
337550-000 | FIST-SOSA2-2R12-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 1 12-strip ribbon fiber, with Heat Shrink type splice holder -
![]()
377602-000 | FIST-SOSA2-8SC-S FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
488880-000 | FIST-SOSA2-2SE-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
536788-000 | FIST-SOSA2-4SE-S FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
760240238 | FIST-SOSA2-2SP-S FIST® Splice/patch Sub-assembly kit with 2 trays, each for holding up to 2 fiber adapters and 8 splice protectors -
![]()
850376-000 | FIST-SOSA2-5R4/8-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder -
![]()
CC8950-000 | FIST-SOSA2-2MS-S FIST® Splice Sub-assembly kit with 2 trays, each for holding up to 24 primary or 10 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CK8043-000 | FIST-SOSA2-4SE-MS FIST® Splice Sub-assembly kit with 4 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CS5332-000 | FIST-SOSA2-6SC-S FIST® Splice Sub-assembly kit with 6 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CS8893-000 | FIST-SOSA2-5SE-A FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with ANT type splice holder -
![]()
CS8895-000 | FIST-SOSA2-5SE-S FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 12 primary or 4 secondary coated fibers, with Heat Shrink type splice holder -
![]()
CU7947-000 | FIST-SOSA2-8SC-MS FIST® Splice Sub-assembly kit with 8 trays, each for holding up to 4 primary or 2 secondary coated fibers, with Micro Heat Shrink type splice holder -
![]()
CU8918-000 | FIST-SOSA2-8DC-S FIST® Splice Sub-assembly kit with 8 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder -
![]()
CU8919-000 | FIST-SOSA2-4DC-S FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder
Other Ways to Browse
