S4-90M-R1-V3
8-port Planar Array Antenna, 3300–3800 MHz, 90° HPBW, 1x RET, with M-LOC connectors
Features and Benefits
- Planar array antenna – 4 columns
- Single internal RET control for all four antenna arrays
- Designed for beamforming, includes calibration port
- Optimized for software defined split six sector applications
- Fits in the CommScope AEKT solution
- Includes M-LOC type cluster connector(s)
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Calibration Connector Interface | M-LOC |
| Calibration Connector Quantity | 1 |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | M-LOC |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 0 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v1 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Internal RET | High band (1) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 307 mm | 12.087 in |
| Depth | 118 mm | 4.646 in |
| Length | 850 mm | 33.465 in |
| Net Weight, without mounting kit | 8.8 kg | 19.401 lb |
| TDD Column Spacing | 42 mm | 1.654 in |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 3300 – 3800 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 400 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Gain, dBi | 15.4 | 15.7 |
| Beamwidth, Horizontal, degrees | 96 | 84 |
| Beamwidth, Vertical, degrees | 6.7 | 6.3 |
| Beam Tilt, degrees | 2–12 | 2–12 |
| USLS (First Lobe), dB | 18 | 17 |
| Front-to-Back Ratio at 180°, dB | 28 | 27 |
| Coupling level, Amp, Antenna port to Cal port, dB | 26 | 26 |
| Coupling level, max Amp Δ, Antenna port to Cal port, dB | ±2 | ±2 |
| Coupler, max Amp Δ, Antenna port to Cal port, dB | 0.9 | 0.9 |
| Coupler, max Phase Δ, Antenna port to Cal port, degrees | 7 | 7 |
| Isolation, Cross Polarization, dB | 25 | 25 |
| Isolation, Inter-band, dB | 19 | 19 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -140 | -140 |
| Input Power per Port at 50°C, maximum, watts | 75 | 75 |
Electrical Specifications, Broadcast 65
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Gain, dBi | 16.3 | 16.4 |
| Beamwidth, Horizontal, degrees | 65 | 63 |
| Beamwidth, Horizontal Tolerance, degrees | ±3.2 | ±2.8 |
| Beamwidth, Vertical, degrees | 6.7 | 6.3 |
| Front-to-Back Total Power at 180° ± 30°, dB | 23 | 23 |
| USLS (First Lobe), dB | 18 | 18 |
Electrical Specifications, Service Beam
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Steered 0° Gain, dBi | 20.5 | 20.8 |
| Steered 0° Beamwidth, Horizontal, degrees | 26 | 24 |
| Steered 0° Front-to-Back Total Power at 180° ± 30°, dB | 31 | 28 |
| Steered 0° Horizontal Sidelobe, dB | 28 | 27 |
| Steered 30° Gain, dBi | 19.7 | 19.8 |
| Steered 30° Beamwidth, Horizontal, degrees | 28 | 26 |
Electrical Specifications, Soft Split
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Gain, dBi | 19.6 | 19.9 |
| Beamwidth, Horizontal, degrees | 31 | 28 |
| CPR at Beampeak, dB | 17 | 17 |
| Front-to-Back Total Power at 180° ± 30°, dB | 27 | 27 |
| Horizontal Sidelobe, dB | 18 | 17 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.27 m² | 2.906 ft² |
| Effective Projective Area (EPA), lateral | 0.05 m² | 0.538 ft² |
| Mechanical Tilt Range | 0°–25° |
| Wind Loading @ Velocity, frontal | 284.0 N @ 150 km/h (63.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 56.0 N @ 150 km/h (12.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 342.0 N @ 150 km/h (76.9 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 413 mm | 16.26 in |
| Depth, packed | 257 mm | 10.118 in |
| Length, packed | 1035 mm | 40.748 in |
| Weight, gross | 19.7 kg | 43.431 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Calibration Connector Interface | M-LOC |
| Calibration Connector Quantity | 1 |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | M-LOC |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 0 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v1 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Internal RET | High band (1) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 307 mm | 12.087 in |
| Depth | 118 mm | 4.646 in |
| Length | 850 mm | 33.465 in |
| Net Weight, without mounting kit | 8.8 kg | 19.401 lb |
| TDD Column Spacing | 42 mm | 1.654 in |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 3300 – 3800 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 400 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Gain, dBi | 15.4 | 15.7 |
| Beamwidth, Horizontal, degrees | 96 | 84 |
| Beamwidth, Vertical, degrees | 6.7 | 6.3 |
| Beam Tilt, degrees | 2–12 | 2–12 |
| USLS (First Lobe), dB | 18 | 17 |
| Front-to-Back Ratio at 180°, dB | 28 | 27 |
| Coupling level, Amp, Antenna port to Cal port, dB | 26 | 26 |
| Coupling level, max Amp Δ, Antenna port to Cal port, dB | ±2 | ±2 |
| Coupler, max Amp Δ, Antenna port to Cal port, dB | 0.9 | 0.9 |
| Coupler, max Phase Δ, Antenna port to Cal port, degrees | 7 | 7 |
| Isolation, Cross Polarization, dB | 25 | 25 |
| Isolation, Inter-band, dB | 19 | 19 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -140 | -140 |
| Input Power per Port at 50°C, maximum, watts | 75 | 75 |
Electrical Specifications, Broadcast 65
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Gain, dBi | 16.3 | 16.4 |
| Beamwidth, Horizontal, degrees | 65 | 63 |
| Beamwidth, Horizontal Tolerance, degrees | ±3.2 | ±2.8 |
| Beamwidth, Vertical, degrees | 6.7 | 6.3 |
| Front-to-Back Total Power at 180° ± 30°, dB | 23 | 23 |
| USLS (First Lobe), dB | 18 | 18 |
Electrical Specifications, Service Beam
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Steered 0° Gain, dBi | 20.5 | 20.8 |
| Steered 0° Beamwidth, Horizontal, degrees | 26 | 24 |
| Steered 0° Front-to-Back Total Power at 180° ± 30°, dB | 31 | 28 |
| Steered 0° Horizontal Sidelobe, dB | 28 | 27 |
| Steered 30° Gain, dBi | 19.7 | 19.8 |
| Steered 30° Beamwidth, Horizontal, degrees | 28 | 26 |
Electrical Specifications, Soft Split
| Frequency Band, MHz | 3300–3600 | 3600–3800 |
| Gain, dBi | 19.6 | 19.9 |
| Beamwidth, Horizontal, degrees | 31 | 28 |
| CPR at Beampeak, dB | 17 | 17 |
| Front-to-Back Total Power at 180° ± 30°, dB | 27 | 27 |
| Horizontal Sidelobe, dB | 18 | 17 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.27 m² | 2.906 ft² |
| Effective Projective Area (EPA), lateral | 0.05 m² | 0.538 ft² |
| Mechanical Tilt Range | 0°–25° |
| Wind Loading @ Velocity, frontal | 284.0 N @ 150 km/h (63.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 56.0 N @ 150 km/h (12.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 342.0 N @ 150 km/h (76.9 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 413 mm | 16.26 in |
| Depth, packed | 257 mm | 10.118 in |
| Length, packed | 1035 mm | 40.748 in |
| Weight, gross | 19.7 kg | 43.431 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
800PIPEKIT-X Cluster Mounting Kit. Use for mounting multiple wide panel antennas to a single pole or stand. One kit mounts up to three antennas. Removeable spacers allow this kit to fit on poles measuring 3.5, 4.5 or 5.5 in. OD.
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Structural Support, Tools & Accessories
-
![]()
800PIPEKIT-X Cluster Mounting Kit. Use for mounting multiple wide panel antennas to a single pole or stand. One kit mounts up to three antennas. Removeable spacers allow this kit to fit on poles measuring 3.5, 4.5 or 5.5 in. OD.
-
![]()
800PIPEKIT-X Cluster Mounting Kit. Use for mounting multiple wide panel antennas to a single pole or stand. One kit mounts up to three antennas. Removeable spacers allow this kit to fit on poles measuring 3.5, 4.5 or 5.5 in. OD.
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
800PIPEKIT-X Cluster Mounting Kit. Use for mounting multiple wide panel antennas to a single pole or stand. One kit mounts up to three antennas. Removeable spacers allow this kit to fit on poles measuring 3.5, 4.5 or 5.5 in. OD.
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Structural Support, Tools & Accessories
-
![]()
800PIPEKIT-X Cluster Mounting Kit. Use for mounting multiple wide panel antennas to a single pole or stand. One kit mounts up to three antennas. Removeable spacers allow this kit to fit on poles measuring 3.5, 4.5 or 5.5 in. OD.
-
![]()
800PIPEKIT-X Cluster Mounting Kit. Use for mounting multiple wide panel antennas to a single pole or stand. One kit mounts up to three antennas. Removeable spacers allow this kit to fit on poles measuring 3.5, 4.5 or 5.5 in. OD.
Other Ways to Browse
