Warning Icon
This product was discontinued on: March 31, 2022

For other alternatives, please contact us for more information.

0 Replacement products available

CV3PX308R1

8-port sector antenna, 2x 790–960 and 6x 1710–2690 MHz, 65° HPBW, 4x RET with manual override.

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays
  • All Internal RET actuators are connected in “Cascaded SRET” configuration

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, low band 2
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 353 mm | 13.898 in
Depth 209 mm | 8.228 in
Length 2067 mm | 81.378 in
Net Weight, without mounting kit 27.1 kg | 59.745 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960 1710–1920 1920–2180 2300–2500 2500–2690
Gain, dBi 15.6 15.9 15.7 16.1 17.0 17.4
Beamwidth, Horizontal, degrees 65 64 61 61 66 61
Beamwidth, Vertical, degrees 11.1 10.4 10.4 9.3 7.8 7.1
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 24 25 27 27 31 29
CPR at Boresight, dB 16 14 16 16 17 17
CPR at Sector, dB 9 9 5 4 5 5
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 790–896 870–960 1710–1920 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.3 15.6 15.5 16.0 16.6 16.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.2 ±0.5 ±0.3 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 0 ° | 15.3
5 ° | 15.4
10 ° | 15.3
0 ° | 15.6
5 ° | 15.6
10 ° | 15.5
0 ° | 15.5
5 ° | 15.5
10 ° | 15.5
0 ° | 16.0
5 ° | 16.0
10 ° | 16.0
0 ° | 16.7
5 ° | 16.6
10 ° | 16.3
0 ° | 16.8
5 ° | 16.7
10 ° | 16.4
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1.5 ±2.3 ±3 ±5 ±6
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.6 ±0.7 ±0.4 ±0.5
USLS, beampeak to 20° above beampeak, dB 18 18 18 18 18 18
Front-to-Back Total Power at 180° ± 30°, dB 24 26 23 25 27 26
CPR at Boresight, dB 17 15 18 18 19 20
CPR at Sector, dB 9 9 6 5 7 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 928.0 N @ 150 km/h (208.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 356.0 N @ 150 km/h (80.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 953.0 N @ 150 km/h (214.2 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 420 mm | 16.535 in
Depth, packed 320 mm | 12.598 in
Length, packed 2252 mm | 88.661 in
Weight, gross 46.5 kg | 102.515 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, low band 2
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 353 mm | 13.898 in
Depth 209 mm | 8.228 in
Length 2067 mm | 81.378 in
Net Weight, without mounting kit 27.1 kg | 59.745 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960 1710–1920 1920–2180 2300–2500 2500–2690
Gain, dBi 15.6 15.9 15.7 16.1 17.0 17.4
Beamwidth, Horizontal, degrees 65 64 61 61 66 61
Beamwidth, Vertical, degrees 11.1 10.4 10.4 9.3 7.8 7.1
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 24 25 27 27 31 29
CPR at Boresight, dB 16 14 16 16 17 17
CPR at Sector, dB 9 9 5 4 5 5
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 790–896 870–960 1710–1920 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.3 15.6 15.5 16.0 16.6 16.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.2 ±0.5 ±0.3 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 0 ° | 15.3; 5 ° | 15.4; 10 ° | 15.3 0 ° | 15.6; 5 ° | 15.6; 10 ° | 15.5 0 ° | 15.5; 5 ° | 15.5; 10 ° | 15.5 0 ° | 16.0; 5 ° | 16.0; 10 ° | 16.0 0 ° | 16.7; 5 ° | 16.6; 10 ° | 16.3 0 ° | 16.8; 5 ° | 16.7; 10 ° | 16.4
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1.5 ±2.3 ±3 ±5 ±6
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.6 ±0.7 ±0.4 ±0.5
USLS, beampeak to 20° above beampeak, dB 18 18 18 18 18 18
Front-to-Back Total Power at 180° ± 30°, dB 24 26 23 25 27 26
CPR at Boresight, dB 17 15 18 18 19 20
CPR at Sector, dB 9 9 6 5 7 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 928.0 N @ 150 km/h (208.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 356.0 N @ 150 km/h (80.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 953.0 N @ 150 km/h (214.2 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 420 mm | 16.535 in
Depth, packed 320 mm | 12.598 in
Length, packed 2252 mm | 88.661 in
Weight, gross 46.5 kg | 102.515 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification