Warning Icon
This product was discontinued on: March 27, 2020

For other alternatives, please contact us for more information.

1 Replacement products available
  • RRZZ-65B-R4
    8-port sector antenna, 4x 694–960 and 4x 1427–2690 MHz, 65° HPBW, 4x RET

CCVVPX308.11R2

8-port sector antenna, 4x 790–960 and 4x 1695–2690 MHz, 65° HPBW, 4x RET with manual override. Bands cascaded SRET designed for Site-Sharing purpose (two Operators / Primaries operating their assigned RET’s independently)
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • The RET interface comprises two pairs of AISG input/output ports, each pair controlling “one side” of the antenna independently: one pair for the left-hand bands 1 and 3 (R1, Y1); one pair for the right-hand bands 2 and 4 (R2, Y2)
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays
  • All Internal RET actuators on each antenna side are connected in “Cascaded SRET” configuration
Specifications

General Specifications

Antenna Type Sector
Polarization ±45°
Band Multiband
Color Gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
Radome Material Fiberglass, UV resistant
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 male | 2 female

Dimensions

Width 498 mm | 19.606 in
Length 2100 mm | 82.677 in
Depth 197 mm | 7.756 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.
Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1695 – 2690 MHz

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET Low band (2) | High band (2)

Electrical Specifications

Frequency Band, MHz 790–862 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 14.9 15.6 16.6 16.8 17.4 18.1 18.2
Beamwidth, Horizontal, degrees 74 63 63 66 68 62 63
Beamwidth, Vertical, degrees 11.3 10.2 7.6 7 6.6 5.6 5.2
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 35 35 34 38 40 39 40
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 250 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 790–862 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 14.7 15.4 16.4 16.5 16.9 17.8 17.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.3 ±0.4 ±0.6 ±0.7 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 0 ° | 14.7
5 ° | 14.7
10 ° | 14.6
0 ° | 15.5
5 ° | 15.5
10 ° | 15.4
0 ° | 16.4
5 ° | 16.4
10 ° | 16.4
0 ° | 16.5
5 ° | 16.5
10 ° | 16.4
0 ° | 16.9
5 ° | 16.9
10 ° | 16.9
0 ° | 17.9
5 ° | 17.9
10 ° | 17.7
0 ° | 17.8
5 ° | 17.9
10 ° | 17.9
Beamwidth, Horizontal Tolerance, degrees ±4.2 ±4.7 ±3.3 ±7.3 ±4.4 ±3.4 ±2.6
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.5 ±0.3 ±0.5 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 18 18 18 18 18 17 18
Front-to-Back Total Power at 180° ± 30°, dB 24 25 27 31 30 31 32
CPR at Boresight, dB 20 18 20 20 18 16 18
CPR at Sector, dB 11 9 9 11 12 11 11

Material Specifications

Radiator Material Low loss circuit board
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 180.5 lbf @ 150 km/h | 803.0 N @ 150 km/h
Wind Loading at Velocity, lateral 275.0 N @ 150 km/h | 61.8 lbf @ 150 km/h
Wind Loading at Velocity, maximum 233.8 lbf @ 150 km/h | 1,040.0 N @ 150 km/h
Wind Speed, maximum 200 km/h | 124.274 mph

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 312 mm | 12.283 in
Length, packed 2286 mm | 90 in
Net Weight, without mounting kit 39 kg | 85.98 lb
Weight, gross 60 kg | 132.277 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Polarization ±45°
Band Multiband
Color Gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
Radome Material Fiberglass, UV resistant
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 male | 2 female

Dimensions

Width 498 mm | 19.606 in
Length 2100 mm | 82.677 in
Depth 197 mm | 7.756 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1695 – 2690 MHz

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET Low band (2) | High band (2)

Electrical Specifications

Frequency Band, MHz 790–862 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 14.9 15.6 16.6 16.8 17.4 18.1 18.2
Beamwidth, Horizontal, degrees 74 63 63 66 68 62 63
Beamwidth, Vertical, degrees 11.3 10.2 7.6 7 6.6 5.6 5.2
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 35 35 34 38 40 39 40
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 250 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 790–862 880–960 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 14.7 15.4 16.4 16.5 16.9 17.8 17.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.3 ±0.4 ±0.6 ±0.7 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 0 ° | 14.7; 5 ° | 14.7; 10 ° | 14.6 0 ° | 15.5; 5 ° | 15.5; 10 ° | 15.4 0 ° | 16.4; 5 ° | 16.4; 10 ° | 16.4 0 ° | 16.5; 5 ° | 16.5; 10 ° | 16.4 0 ° | 16.9; 5 ° | 16.9; 10 ° | 16.9 0 ° | 17.9; 5 ° | 17.9; 10 ° | 17.7 0 ° | 17.8; 5 ° | 17.9; 10 ° | 17.9
Beamwidth, Horizontal Tolerance, degrees ±4.2 ±4.7 ±3.3 ±7.3 ±4.4 ±3.4 ±2.6
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.5 ±0.3 ±0.5 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 18 18 18 18 18 17 18
Front-to-Back Total Power at 180° ± 30°, dB 24 25 27 31 30 31 32
CPR at Boresight, dB 20 18 20 20 18 16 18
CPR at Sector, dB 11 9 9 11 12 11 11

Material Specifications

Radiator Material Low loss circuit board
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 180.5 lbf @ 150 km/h | 803.0 N @ 150 km/h
Wind Loading at Velocity, lateral 275.0 N @ 150 km/h | 61.8 lbf @ 150 km/h
Wind Loading at Velocity, maximum 233.8 lbf @ 150 km/h | 1,040.0 N @ 150 km/h
Wind Speed, maximum 200 km/h | 124.274 mph

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 312 mm | 12.283 in
Length, packed 2286 mm | 90 in
Net Weight, without mounting kit 39 kg | 85.98 lb
Weight, gross 60 kg | 132.277 lb
Click on image to enlarge.
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Other Ways to Browse