For other alternatives, please contact us for more information.

0 Replacement products available

2VV-33C-R4

8-port multibeam antenna, 8x 1695–2690 MHz, 4x 33° HPBW, 4x RET

Specifications

Finish making your selections or clear them to view relevant specifications.

View

How to Buy

Features and Benefits

Enhances network capacity and spectrum utilization when used in six sector applications
Reduces antenna count to minimize Cap-Ex and Op-Ex costs – 3 antennas required for 6 sector configurations

Specifications

General Specifications

Antenna Type	Multibeam
Band	Single band
Color	Light gray
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, total	8

Remote Electrical Tilt (RET) Information, General

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male

Dimensions

Width	395 mm \| 15.551 in
Depth	228 mm \| 8.976 in
Length	2499 mm \| 98.386 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	1695 – 2690 MHz
Polarization	±45°
Total Input Power, maximum	1,200 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol	3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Input Voltage	10–30 Vdc
Internal RET	High band (4)

Electrical Specifications

Frequency Band, MHz	1695–1880	1850–1990	1920–2180	2300–2400	2490–2690
Gain, dBi	18.4	19.0	19.4	19.8	20.2
Beam Centers, Horizontal, degrees	±27	±27	±27	±27	±27
Beamwidth, Horizontal, degrees	39	37	36	34	29
Beamwidth, Vertical, degrees	7.9	7.4	6.9	6.2	5.6
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	16	16	16	20	19
Front-to-Back Ratio at 180°, dB	32	33	33	33	31
Isolation, Cross Polarization, dB	25	25	25	25	25
Isolation, Beam to Beam, dB	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	200	200	200	200	200

Electrical Specifications, BASTA

Frequency Band, MHz	1695–1880	1850–1990	1920–2180	2300–2400	2490–2690
Gain by all Beam Tilts, average, dBi	17.8	18.6	18.8	19.4	19.7
Gain by all Beam Tilts Tolerance, dB	±0.9	±0.6	±0.5	±0.6	±0.7
Gain by Beam Tilt, average, dBi	2 ° \| 17.7 7 ° \| 17.9 12 ° \| 17.7	2 ° \| 18.3 7 ° \| 18.7 12 ° \| 18.5	2 ° \| 18.6 7 ° \| 19.0 12 ° \| 18.7	2 ° \| 19.1 7 ° \| 19.5 12 ° \| 19.3	2 ° \| 19.4 7 ° \| 19.9 12 ° \| 19.4
Beamwidth, Horizontal Tolerance, degrees	±1.9	±2.1	±2.2	±3.9	±1.1
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.3	±0.5	±0.3	±0.3
USLS, beampeak to 20° above beampeak, dB	15	16	16	17	16
Front-to-Back Total Power at 180° ± 30°, dB	23	25	25	27	25
CPR at Boresight, dB	21	23	24	20	27
CPR at 10 dB Horizontal Beamwidth, dB	11	16	16	14	10

Mechanical Specifications

Wind Loading at Velocity, frontal	118.7 lbf @ 150 km/h \| 525.0 N @ 150 km/h
Wind Loading at Velocity, lateral	386.0 N @ 150 km/h \| 86.8 lbf @ 150 km/h
Wind Loading at Velocity, maximum	201.9 lbf @ 150 km/h \| 898.0 N @ 150 km/h
Wind Loading at Velocity, rear	121.4 lbf @ 150 km/h \| 540.0 N @ 150 km/h
Wind Speed, maximum	241 km/h \| 149.75 mph

Packaging and Weights

Width, packed	505 mm \| 19.882 in
Depth, packed	386 mm \| 15.197 in
Length, packed	2631 mm \| 103.583 in
Net Weight, without mounting kit	36 kg \| 79.366 lb
Weight, gross	51.8 kg \| 114.199 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value

General Specifications

Antenna Type	Multibeam
Band	Single band
Color	Light gray
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, total	8

Remote Electrical Tilt (RET) Information, General

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male

Dimensions

Width	395 mm \| 15.551 in
Depth	228 mm \| 8.976 in
Length	2499 mm \| 98.386 in

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	1695 – 2690 MHz
Polarization	±45°
Total Input Power, maximum	1,200 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol	3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Input Voltage	10–30 Vdc
Internal RET	High band (4)

Electrical Specifications

Frequency Band, MHz	1695–1880	1850–1990	1920–2180	2300–2400	2490–2690
Gain, dBi	18.4	19.0	19.4	19.8	20.2
Beam Centers, Horizontal, degrees	±27	±27	±27	±27	±27
Beamwidth, Horizontal, degrees	39	37	36	34	29
Beamwidth, Vertical, degrees	7.9	7.4	6.9	6.2	5.6
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	16	16	16	20	19
Front-to-Back Ratio at 180°, dB	32	33	33	33	31
Isolation, Cross Polarization, dB	25	25	25	25	25
Isolation, Beam to Beam, dB	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	200	200	200	200	200

Electrical Specifications, BASTA

Frequency Band, MHz	1695–1880	1850–1990	1920–2180	2300–2400	2490–2690
Gain by all Beam Tilts, average, dBi	17.8	18.6	18.8	19.4	19.7
Gain by all Beam Tilts Tolerance, dB	±0.9	±0.6	±0.5	±0.6	±0.7
Gain by Beam Tilt, average, dBi	2 ° \| 17.7; 7 ° \| 17.9;12 ° \| 17.7	2 ° \| 18.3; 7 ° \| 18.7;12 ° \| 18.5	2 ° \| 18.6; 7 ° \| 19.0;12 ° \| 18.7	2 ° \| 19.1; 7 ° \| 19.5;12 ° \| 19.3	2 ° \| 19.4; 7 ° \| 19.9;12 ° \| 19.4
Beamwidth, Horizontal Tolerance, degrees	±1.9	±2.1	±2.2	±3.9	±1.1
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.3	±0.5	±0.3	±0.3
USLS, beampeak to 20° above beampeak, dB	15	16	16	17	16
Front-to-Back Total Power at 180° ± 30°, dB	23	25	25	27	25
CPR at Boresight, dB	21	23	24	20	27
CPR at 10 dB Horizontal Beamwidth, dB	11	16	16	14	10

Mechanical Specifications

Wind Loading at Velocity, frontal	118.7 lbf @ 150 km/h \| 525.0 N @ 150 km/h
Wind Loading at Velocity, lateral	386.0 N @ 150 km/h \| 86.8 lbf @ 150 km/h
Wind Loading at Velocity, maximum	201.9 lbf @ 150 km/h \| 898.0 N @ 150 km/h
Wind Loading at Velocity, rear	121.4 lbf @ 150 km/h \| 540.0 N @ 150 km/h
Wind Speed, maximum	241 km/h \| 149.75 mph

Packaging and Weights

Width, packed	505 mm \| 19.882 in
Depth, packed	386 mm \| 15.197 in
Length, packed	2631 mm \| 103.583 in
Net Weight, without mounting kit	36 kg \| 79.366 lb
Weight, gross	51.8 kg \| 114.199 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value