Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2RR2VV-33C-R4

16-port multibeam antenna, 8x 694–960 MHz, 2x 2-beam 33° HPBW and 8x 1695–2690 MHz, 2x 2-beam 33° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Provides 4T4R capability in low and mid bands
  • Twin beam patterns are optimized for minimum beam crossover providing for improved LTE data throughput
  • GREEN and High Capacity Antenna Solution
  • Innovative aerodynamic shape optimized for reduced wind loading in every direction
  • Enhances network capacity through six sectors on high band while maintaining low band coverage layer through three sectors with only three antenna faces
  • "Green" packaging of reduced size and gross weight that uses less material and reduces shipping pollution
  • Optional Mounting Kits with mechanical tilt capacity need to be ordered separately

General Specifications

Antenna Type Multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 8
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2235 mm | 87.992 in
Net Weight, antenna only 63.5 kg | 139.993 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,500 W @ 50 °C

Electrical Specifications

R1-R4 R1-R4 R1-R4 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 698–806 790–896 890–960 1710–1990 1920–2300 2300–2500 2490–2690
RF Port 1-8 1-8 1-8 9-16 9-16 9-16 9-16
Gain at Mid Tilt, dBi 14.1 15.2 15.7 17.4 18.4 18.7 18.4
Beamwidth, Horizontal, degrees 40 37 34 34 31 28 25
Beamwidth, Vertical, degrees 19.4 17.6 16.2 7.8 7.2 6.3 5.9
Beam Tilt, degrees 2–16 2–16 2–16 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 16 15 16 17 14
Front-to-Back Ratio at 180°, dB 28 33 32 33 34 32 30
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
Isolation, Beam to Beam, dB 17 17 17 17 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200 150 150

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 790–896 890–960 1710–1990 1920–2300 2300–2500 2490–2690
Gain by all Beam Tilts, average, dBi 14.1 15.2 15.6 17.3 18.2 18.5 18.2
Gain by all Beam Tilts Tolerance, dB ±0.8 ±0.9 ±0.8 ±1.1 ±0.7 ±0.9 ±0.8
Beamwidth, Horizontal Tolerance, degrees ±3 ±2 ±3 ±3 ±2 ±2 ±3
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.2 ±0.5 ±0.2 ±0.2 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 23 20 19 12 15 15 14
Front-to-Back Total Power at 180° ± 30°, dB 22 26 26 27 28 27 25
CPR at Boresight, dB 17 17 18 17 19 20 16
CPR at 10 dB Horizontal Beamwidth, dB 5 8 9 11 12 9 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 895.0 N @ 150 km/h (201.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 262.0 N @ 150 km/h (58.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,140.0 N @ 150 km/h (256.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 558.0 N @ 150 km/h (125.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 744 mm | 29.291 in
Depth, packed 346 mm | 13.622 in
Length, packed 2364 mm | 93.071 in
Weight, gross 79.5 kg | 175.267 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant, Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 8
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2235 mm | 87.992 in
Net Weight, antenna only 63.5 kg | 139.993 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,500 W @ 50 °C

Electrical Specifications

R1-R4 R1-R4 R1-R4 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 698–806 790–896 890–960 1710–1990 1920–2300 2300–2500 2490–2690
RF Port 1-8 1-8 1-8 9-16 9-16 9-16 9-16
Gain at Mid Tilt, dBi 14.1 15.2 15.7 17.4 18.4 18.7 18.4
Beamwidth, Horizontal, degrees 40 37 34 34 31 28 25
Beamwidth, Vertical, degrees 19.4 17.6 16.2 7.8 7.2 6.3 5.9
Beam Tilt, degrees 2–16 2–16 2–16 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 17 16 15 16 17 14
Front-to-Back Ratio at 180°, dB 28 33 32 33 34 32 30
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
Isolation, Beam to Beam, dB 17 17 17 17 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200 150 150

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 790–896 890–960 1710–1990 1920–2300 2300–2500 2490–2690
Gain by all Beam Tilts, average, dBi 14.1 15.2 15.6 17.3 18.2 18.5 18.2
Gain by all Beam Tilts Tolerance, dB ±0.8 ±0.9 ±0.8 ±1.1 ±0.7 ±0.9 ±0.8
Beamwidth, Horizontal Tolerance, degrees ±3 ±2 ±3 ±3 ±2 ±2 ±3
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.2 ±0.5 ±0.2 ±0.2 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 23 20 19 12 15 15 14
Front-to-Back Total Power at 180° ± 30°, dB 22 26 26 27 28 27 25
CPR at Boresight, dB 17 17 18 17 19 20 16
CPR at 10 dB Horizontal Beamwidth, dB 5 8 9 11 12 9 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 895.0 N @ 150 km/h (201.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 262.0 N @ 150 km/h (58.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,140.0 N @ 150 km/h (256.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 558.0 N @ 150 km/h (125.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 744 mm | 29.291 in
Depth, packed 346 mm | 13.622 in
Length, packed 2364 mm | 93.071 in
Weight, gross 79.5 kg | 175.267 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant, Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification