Warning Icon
This product was discontinued on: September 30, 2020

For other alternatives, please contact us for more information.

0 Replacement products available

HH45A-2XB1

4-port sector antenna, 4x 1710–2180 MHz, 45° HPBW, 2x RET. An Internal Smart Bias Tee is configured on Port 1. Ideal for capacity optimization and supports 4 x 4 MIMO.

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1
Internal RET High band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 407 mm | 16.024 in
Depth 120 mm | 4.724 in
Length 1278 mm | 50.315 in
Net Weight, without mounting kit 14.7 kg | 32.408 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 18.2 18.9 19.2
Beamwidth, Horizontal, degrees 46 44 43
Beamwidth, Vertical, degrees 7.4 7 6.6
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 17 16 16
Front-to-Back Ratio at 180°, dB 35 30 28
Isolation, Cross Polarization, dB 28 28 28
Isolation, Inter-band, dB 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port, maximum, watts 300 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 17.8 18.5 18.8
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.4
Gain by Beam Tilt, average, dBi 2 ° | 17.7
7 ° | 17.9
12 ° | 17.8
2 ° | 18.3
7 ° | 18.6
12 ° | 18.5
2 ° | 18.6
7 ° | 18.9
12 ° | 18.5
Beamwidth, Horizontal Tolerance, degrees ±2.5 ±1.9 ±2.1
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5
USLS, beampeak to 20° above beampeak, dB 15 18 18
Front-to-Back Total Power at 180° ± 30°, dB 27 26 26
CPR at Boresight, dB 17 17 16
CPR at Sector, dB 11 13 14

Mechanical Specifications

Wind Loading @ Velocity, frontal 577.0 N @ 150 km/h (129.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 88.0 N @ 150 km/h (19.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 675.0 N @ 150 km/h (151.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 552 mm | 21.732 in
Depth, packed 292 mm | 11.496 in
Length, packed 1403 mm | 55.236 in
Weight, gross 26.2 kg | 57.761 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1
Internal RET High band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 407 mm | 16.024 in
Depth 120 mm | 4.724 in
Length 1278 mm | 50.315 in
Net Weight, without mounting kit 14.7 kg | 32.408 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 18.2 18.9 19.2
Beamwidth, Horizontal, degrees 46 44 43
Beamwidth, Vertical, degrees 7.4 7 6.6
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 17 16 16
Front-to-Back Ratio at 180°, dB 35 30 28
Isolation, Cross Polarization, dB 28 28 28
Isolation, Inter-band, dB 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port, maximum, watts 300 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 17.8 18.5 18.8
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.4
Gain by Beam Tilt, average, dBi 2 ° | 17.7; 7 ° | 17.9;12 ° | 17.8 2 ° | 18.3; 7 ° | 18.6;12 ° | 18.5 2 ° | 18.6; 7 ° | 18.9;12 ° | 18.5
Beamwidth, Horizontal Tolerance, degrees ±2.5 ±1.9 ±2.1
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5
USLS, beampeak to 20° above beampeak, dB 15 18 18
Front-to-Back Total Power at 180° ± 30°, dB 27 26 26
CPR at Boresight, dB 17 17 16
CPR at Sector, dB 11 13 14

Mechanical Specifications

Wind Loading @ Velocity, frontal 577.0 N @ 150 km/h (129.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 88.0 N @ 150 km/h (19.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 675.0 N @ 150 km/h (151.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 552 mm | 21.732 in
Depth, packed 292 mm | 11.496 in
Length, packed 1403 mm | 55.236 in
Weight, gross 26.2 kg | 57.761 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification